بررسی ظرفیت لنگر خمشی اتصال گوشه‌ای فارسی ساخته شده با قلیف در تخته خرده چوب و تخته فیبر نیمه سنگین (MDF)

نوع مقاله : مقاله پژوهشی

نویسنده

دانش آموخته کارشناسی ارشد صنایع چوب و کاغذ، واحد علوم تحقیقات دانشگاه آزاد اسلامی تهران، ایران

چکیده

این مطالعه با هدف بررسی تاثیر عمق نفوذ (8، 11 و 14( میلیمتر و جنس قلیف (تخته فیبر سنگین (HDF)، تخته لایه و چوب ممرز (Carpinus betulus) بر ظرفیت لنگر خمشی اتصال‌های گوشه ای فارسی L) شکل) ساخته شده از تخته خرده چوب و MDF انجام شد. در این پژوهش اتصال‌های L شکل با ابعاد 16 × 230 × 160میلیمتر (به ترتیب طول × پهنا × ضخامت) و اتصال دهنده قلیف با چسب پلی وینیل استات ساخته شدند. اتصال‌های ساخته شده با وسیله دستگاه اینسترون در حالت بارگذاری کششی و فشاری مورد آزمون قرار گرفتند. نتایج نشان دادند که ظرفیت لنگر خمشی در حالت بارگذاری فشاری بیشتر از کششی است. کمترین ظرفیت لنگر خمشی در حالت بارگذاری کششی مربوط به اتصال ساخته شده از تخته خرده چوب با قلیف از جنس تخته لایه و عمق نفوذ 14میلیمتر بوده و بیشترین آن مربوط به اتصال ساخته شده از MDF با قلیف از جنس تخته لایه و عمق نفوذ 14میلیمتر بود. در حالت بارگذاری فشاری کمترین ظرفیت لنگر خمشی مربوط به اتصال ساخته شده از تخته خرده چوب با قلیف از جنس چوب و عمق نفوذ 11میلیمتر بوده و بیشترین آن مربوط به اتصال ساخته شده از MDF با قلیف از جنس HDF و عمق نفوذ 8 میلیمتر بود.

کلیدواژه‌ها

موضوعات


[1] Eckelman, C.A., 2003. Textbook of product engineering and strength design of furniture. West Lafayette, Purdue University Press, p 210-221.
[2] Jones, A. and Lutes, R.,  1993. Handbook of joinery. New York, USA. Sterling Press. 463p.
[3] Eckelman, C.A., and L, F.C. 1997. Bending Strength of Corner Joints Constructed with Injection Molded Splines. Forest Products Journal, 47(4):89-92.
[4]  Zhang, J.L. and  Eckelman, C.A., 1993. The bending moment resistance of single–dowel corner joints in case construction. Forest Products Journal, 43(6):19-24.
[5] Zhang, J.L. and Eckelman, C.A., 1993. Rational design of multi dowel corner joints in case construction. Forest Products Journal, 43(11/12):52-58.
[6] Tankut, A.N., 2005. Optimum dowel spacing for corner joints in 32 mm cabinet construction. Forest Products Journal, 55(12):100–104.
[7]Abdolzadeh, H., Ebrahimi, Gh., Layeghi, M., Ghassemieh, M. and Mirshokrai, S. A., 2014. Mechanical properties of Beech-Furfuryl alcohol wood pollymer. Iranian Journal of Wood and Paper Industries, 4(2): 131-140. (In Persian).
[8] Norvydas, V. and Juodeikienė, I., Minelga, D., 2005. The influence of glued dowel joints construction on the bending moment resistance. Material Science, 11(1):36-39.
[9] Tankut, A.N. and  Tankut N., 2010. Evaluation the effects of edge banding type and thickness on the strength of corner joints in case–type furniture. Material & Design, 31(29):56-63.
[10] Tankut, A. N. and Tankut, N., 2009. Investigations the effects of fastener, glue, and composite material types on the strength of corner joints in case–type furniture construction. Material & Design, 30(41):75-82.
[11] Tas, H.H., 2010. Strength properties of L–profiled furniture joints constructed with laminated wooden panels. Scientific Research and Essays, 5(6): 45-50.
[12] Atar, M. and keskin, H., Peker, H., ustundag, A., Togay, A., candan, Z.,  2010.  Impacts of different joint angles and adhesives on diagonal tension performances of box–type furniture. Bioresources,  5(1):343–355.
[13] Determination of moisture content wood–based panels. German version EN 323, 1993.
[14] Determination of moisture content wood–based panels. German version EN 322, 1993.
[15] Standard test methods for specific gravity of wood and wood–base materials, Annual Book of ASTM Standard, D 2395, 1999.
[16] Determination of tensile strength perpendicular to the plane of the board. German version EN 319, 1993.
[17] Determination of modulus of elasticity in bending and of bending strength.German version EN 310, 1993.