تعیین میزان مصرف بهینه نشاسته کاتیونی بر پایه مقاومت های مکانیکی خمیر کاغذهای حاصل از ترکیب خمیر کارتن بازیافتی و خمیر NSSC دست اول

نوع مقاله : مقاله پژوهشی

نویسندگان

1 کارشناس ارشد گروه خمیر و کاغذ دانشگاه علوم کشاورزی و منابع طبیعی گرگان

2 استادیار تکنولو‍‍ژی خمیر و کاغذ دانشگاه علوم کشاورزی و منابع طبیعی گرگان، گروه علوم و صنایع چوب و کاغذ

3 دانشجوی دکترا گروه خمیر و کاغذ دانشگاه علوم کشاورزی و منابع طبیعی گرگان

چکیده

این تحقیق با هدف بهینه سازی مصرف نشاستة کاتیونی برای بهبود ویژگی های مکانیکی خمیر کاغذهای حاصل از ترکیب خمیر کارتن بازیافتی (OCC) و خمیر نیمه شیمیایی سولفیت خنثی (NSSC) دست اول انجام پذیرفت. خمیرهای NSSC و OCC با نسبت های 80/20 ، 70/30 و 60/40 با یکدیگر مخلوط شدند. نشاسته کاتیونی در مقادیر مختلف 5/0 ، 25/1، 2 و 3 درصد استفاده شد. ویژگی های مکانیکی کاغذهای حاصل بر پایه استاندارد تاپی اندازه گیری شد. نتایج حاصل از روش امتیازدهی بر اساس محاسبه معادله های نرمال سازی نشان داد که تیمار C4 با 60 درصد خمیر NSSC و 40 درصد خمیر OCC با مقدار 3 درصد نشاسته از نظر مجموع ویژگی های مکانیکی بهترین تیمار می باشد. همچنین با افزایش سهم  OCCدر مخلوط خمیرها، مقادیر مقاومت به کشش، پاره شدن و ترکیدن کاغذهای حاصل افزایش ولی مقادیر مقاومت کنکورای لایه کنگره ای و لهیدگی در حالت حلقه کاهش یافت. به طور کلی با افزایش میزان مصرف نشاسته کاتیونی، مقاومت های مکانیکی کاغذ افزایش یافت و بهترین میزان مصرف آن در سطح 3 درصد تعیین شد.

کلیدواژه‌ها


 
1- Afra,E. 2002. Properties of paper an introduction. Aiij  Publications.392 pages.( Translated In Persion)
2- Akbarpour,I. 2009. Enzymatic deinking of old newspaper. M.SC thesis. Agricultural sciences&natural resources university of gorgan.121 pages.(In Persion)
3- Asadpour atouii, Gh. Ghasemian. A. Saraeyan,A.R and Ghaffari,M. 2008. occ pulp quality study and optimum occ consumption mixed with NSSC pulp from hardwood possibility to produce fluting paper in Mazandaran wood &  paper industries. 10 pages. (In Persion)
4- Asgari, H. 2000. Investigation of the effect of non-fiber additives on pulping and paper properties from waste packaging papers. M.SC thesis. Tarbiat moddares University. 120 pages.(In Persion)
5- Barzan, A. 1997. Investigation of the application of waste paper packaging in fluting  paper production in Mazandaran wood & paper industries. M.SC thesis. Tarbiat  moddares University.95 pages.(In Persion)
6- Balazadeh, S. 1999. Investigation of the optimization of additive materials use in OMP production  in Mazandaran wood &  paper industries. M.SC thesis. Agricultural         sciences&natural resources university of gorgan.106 pages.(In Persion)
7- Ekhtera , M. H., Rezayati charani , P ., Ramezani ,O., Azadfallah, M . 2008. Effects of poly-aluminum chloride, starch, alum , and rosin on the rosin sizing , strength, and microscopic appearance of paper prepared from old corrugated container(occ) pulp. Bioresources, 4(2): 291-318
8- Feyzi, A.1997. Recycling of waste paper. Seminar thesis.Agricultural sciences&natural resources university of gorgan.Pp 9-19. (In Persion)
9- Glittenberg, detlev. 1993. Starch alternatives for improved strength, retention, and   sizing.Tappi journal 11(76): 215-2191.
10- Howard, R .C and Jowsey, c. j. j. 1989. pulp paper sci .,15(6) : 225- 229
11- Hamzeh,Y. and Rostampour,A. 2008. Principales of papermaking chemistry. Tehran Univ. Press, 424p(In Persion)
12- Heermann, M., S. Welter, and M. A. Hubbe. 2006. Effect of high  treatment levels in a dry- strength  additive: program based on deposition of polyelectrolyte complexes How  much glue is too much?. Tappi journal 5(6): 9-14
13- Hubbe, M.A .2006a. Bonding between cellulosic fibers. Bioresources   Technology,1(2): 281-318.
14- Jalal, S. 1896. Optimum use of paper waste. Proceeding book of the 1st conference of  forest and industry. Industry Association. 145 pages.(In Persion)
15- Jallali Tourshizi, H. 2008. Determination of dry strength additives composition on recycled OCC strength properties.the qst Iranian conference on supplying raw materials and development of wood & paper industries. M.SC thesis. Department of natural resources of Tehran university.120 pages.(In Persion)
16- Linen, C., Booth, G. 1990 . paper matters. Uk: paper publication
17- Mirshokraei, S.A. 2001. Pulp & paper technologists(G.A. Smook). Aiij Publications. 501 pages.( Translated In Persion)
18- Nouri chaperperdi. H. 2006. The effect of refining on MOW & OMP of paper properties. M.SC thesis. Agricultural sciences&natural resources university of gorgan.99 pages.(In Persion)