ORIGINAL_ARTICLE
تاثیر کاربرد دوباره مایع پیش استخراج شده بر ویژگی های مقاومتی خمیرکاغذ سودا-آنتراکینون کاه گندم
در این تحقیق تاثیر پیش استخراج و بازگردانی مایع بهدست آمده از مرحله پیش استخراج با قلیا و کاربرد دوباره آن در
مرحله پسی پیش استخراج، بر تولید خمیر سودا - آنتراکینون ازکاه گندم بررسی شد. عمل پیش استخراج کاه گندم با محلول
10 درصد انجام شد. در - قلیایی در دمای 140 درجه سلسیوس و زمان 90 دقیقه به منظوردست یابی به کاهش وزن حدود 8
شرایط فرایندی پیش استخراج با قلیا ازمایع بهدست آمده از این مرحله به عنوان مایع پیش استخراج کاه در مرحله پسی
(مرحله اول بازگردانی مایع یا لیکور) و ازمایع بهدست آمده از مرحله اول بازگردانی نیز به عنوان مایع پیش استخراج کاه در
مرحله پسی (مرحله دوم بازگردانی مایع) استفاده شد. نتایج تولید خمیرکاغذ برای همه تیمارهای پیش استخراج شده در
مقایسه با کاه پیش استخراج نشده (شاهد)، برای دست یابی به عددکاپای حدود 12 برای خمیر قا بل رنگ بری نشان داده
است که بازده بر پایه وزن خشک کاه اولیه (بازده کل)، برای همه تیمارهای پیش استخراج شده ونیز نمونه شاهد بدون پیش
استخراج تا حدودی یکسان بوده است. این در حالی است که بازده خمیر کاغذ بر پایه وزن خشک کاه پیش استخراج شده
(بازده خمیرسازی ) درکاه پیش استخراج شده بیشتر از کاه شاهد بدون پیش استخراج بوده است. واکنش خمیر کاغذهای
سودا - آنتراکینون کاه پیش استخراج شده به پالایش نسبت به خمیرکاغذ شاهد پیش استخراج نشده ضعیفتر بوده است.
نتایج ویژگی های مقاومتی نشان داد که با پیش استخراج شاخص مقاومت به کشش و ترکیدن کاهش یافت درحالی که
بازگردانی مایع پیش استخراج تاثیر معنیداری بر این مقاومتها نداشت. همچنین پیش استخراج و بازگردانی مایع پیش
استخراج بر روی شاخص مقاومت به پارگی تاثیر معنیدار نداشت.
https://www.ijwp.ir/article_11502_5e0331cc54413b45b84cfa9881f2ad65.pdf
2012-01-01
1
12
کاه گندم
پیش استخراج با قلیا
بازگردانی مایع پیش استخراج شده
تولید خمیر سودا- آنتراکینون
صدیقه
حسینخانی
1
دانشجوی کارشناسی ارشد،گروه علوم و صنایع چوب و کاغذ دانشگاه علوم کشاورزی و منابع طبیعی گرگان
LEAD_AUTHOR
حسین
رسالتی
2
استاد،گروه علوم و صنایع چوب و کاغذ دانشگاه علوم کشاورزی ومنابع طبیعی گرگان
AUTHOR
احمدرضا
سرائیان
3
استادیار،گروه علوم و صنایع چوب و کاغذ دانشگاه علوم کشاورزی و منابع طبیعی گرگان
AUTHOR
محمدرضا
دهقانی فیروزآبادی
4
دانشیار گروه علوم و صنایع چوب و کاغذ دانشگاه علوم کشاورزی و منابع طبیعی گرگان
AUTHOR
[1] Retsina, Theodora and Pylkkanen Vesa. 2007. AVAPTM, A Novel Biorefinery Concept.
1
Tappi Web Exclusives 1-4.
2
[2] Yoon, S-H. and van Heiningen, A., 2008. Kraft pulping and papermaking properties of
3
hot-water pre-extracted loblolly pine in an integrated forest products biorefinery. TAPPI
4
JOURNAL, 7(7): 22-26.
5
[3] Goel, Ankur. and Ramaswamy Shri, . 2006. Coparison of Refining Response of Soda AQ
6
and Organosolv Wheat Straw Pulps with Traditional Wood Pulps. Tappi Journal. 1 to 1.
7
[4] Testova, L. 2006. Hemicelluloses Extraction from Birch Wood Prior to Kraft Cooking:
8
Extraction Optimisation and Pulp Properties Investigation. MSc Thesis, Department of
9
Chemical Engineering and Geosciences, Division of Chemical Thechnology, Lulea
10
University of Technology, Sweden.
11
[5] Mao, H., Genco, J.M., van Heiningen, A. Zou, H., Luo, J., and Pendse, H.,
12
2008.Technical economic evaluation of a hardwood biorefinery using the “near-neutral”
13
hemicellulose pre-extraction process. In TAPPI Engineering, Pulping, & Environmental
14
Conference, August 24–27, Portland, Oregon, 165p.
15
[6] Lei, Yichao and et al. 2006. Effect of Hot-Water Extraction on Alkaline Pulping of
16
Bagasse.presentation.1-35.
17
[7] Yoon, S-H., Macewan, K., and van Heiningen, A. 2008. Hot-water pre-extraction from
18
loblolly pine (Pinus taeda) in an integrated forest products biorefinery. TAPPI JOURNAL,
19
7(6): 27–32.
20
[8] Al-Dajani, W.W., and Tschirner, U.W. 2008. Pre-extraction of hemicelluloses and
21
subsequent kraft pulping. Part I: alkaline extraction. TAPPI JOURNAL, 7(6): 3–8.
22
[9] Biermann, Christopher.,J.1996. Handbook of pulping and papermaking.
23
[10] Yoon, S-H., Cullinan, H., and Krishnagopalan, G. A. 2009. The Effect of Modified
24
Alkaline Pulping of Southern Pine, Integrated with Hemicellulose Pre-extraction on Pulp
25
Properties. In TAPPI Engineering, Pulping, & Environmental Conference, October 11–14,
26
Memphis, Tennessee, 146 p.
27
ORIGINAL_ARTICLE
تدوین مدلی ریاضی برای پیشبینی توان نگهداری اتصال با پین در تخته چندلا
این پژوهش با هدف بررسی توان نگهداری اتصال با پین چوبی در تخته چندلا و به دست آوردن یک مدل ریاضی برای پیش -
بینی توان نگهداری این اتصال صورت گرفته است. اعضای اتصال از تخته چندلا با ضخامت 19 میلیمتر و ساخته شده از گونه-
های پهن برگ (راش، ممرز و توسکا) بودند. در این بررسی، اثر متغیرهای گونه چوب پین (راش و ممرز)، قطر پین در سه
13 و 17 میلیمتر، بر توان نگهداری پین در جهت عمود بر سطح و لبه ، 8 و 10 میلیمتر و عمق نفوذ در سه سطح 9 ، سطح 6
تخته چندلا بررسی شده است. نتایج نشان دادند که، توان نگهداری پین در جهت عمود بر سطح ولبه تخته چندلا با افزایش
قطر و عمق نفوذ پین افزایش مییابد. توان نگهداری پین ممرز در سطح و لبه نسبت به پین راش بیشتر بود. بالاترین میزان
2951 ) در پین ممرز با قطر 10 و عمق نفوذ 17 میلی- N) 2447 ) و N) توان نگهداری در جهت عمود بر سطح و لبه به ترتیب
799 ) مربوط به پین N) 784 ) و N) متر دیده شده است. کمترین توان نگهداری پین در جهت عمود بر سطح و لبه به ترتیب
راش با قطر 10 و عمق نفوذ 9 میلیمتر بوده است.
https://www.ijwp.ir/article_11503_3da349284e2adc512816492c5c899dbf.pdf
2012-01-01
37
47
توان نگهداری
تخته چندلا
پین
قطر
عمق نفوذ
مدل ریاضی
مسیب
دالوند
m.dalvand@ut.ac.ir
1
دانش آموخته،گروه علوم و صنایع چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه تهران
LEAD_AUTHOR
قنبر
ابراهیمی
ghanbar.ebrahimi@ut.ac.ir
2
استاد،گروه علوم و صنایع چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه تهران
AUTHOR
مهدی
تجویدی
3
استادیار گروه علوم و صنایع چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه تهران
AUTHOR
محمد
لایقی
4
استادیار گروه علوم و صنایع چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه تهران
AUTHOR
[1] Ebrahimi, G. 2007. Engineering design of furniture structure. Tehran university
1
publication, 491 pp. (In Persian).
2
[2] Eckelman, C. A. 2004. Engineering Design of furniture. Purdue Uni.UsA. Chap 6.
3
[3] Eckelman, C. A. 1969. Engineering concepts of single-pin dowel joint design. Forest
4
products journal 19 (2): 52-59.
5
[4] Eckelman, C. A., Erdil, Y. Z., Zhang, J. 2002. Withdrawal and bending strength of dowel
6
joints constructed of plywood and oriented strand board. Forest products journal 52 (9): 66-
7
[5] Eckelman, C. A. 2004. Textbook of product engineering and strength design of furniture.
8
West Lafayette (IN): Purdue University Press.
9
[6] Bahmani, M., Ebrahimi, G., Fathi, L. 2008. Predicting of Withdrawal Strength With
10
Dowel Joint in Medium Density Fiber (MDF ) By mathematic model. Iranian Journal of
11
wood and paper Science Research. 24(1): 117-124. (In Persian).
12
[7] Bahmani, M., Ebrahimi, GH., Veisi, J. 2010. Design of experimental model for predicting
13
ultimate bending strength dowel joint in medium density fiber. Journal of forest and wood
14
products (JFWP), Iranian journal of natural resources 62(4): 335-342. (In Persian).
15
[8] Somchai, V. (1989). Strength of tenon and dowel in teak (Tectona grandis Linn. f.)
16
Bangkok, 106p.
17
[9] Dalvand, M., Ebrahimi GH., Tajvidi, M., Layeghi, M. 1392. Investigation effect of
18
diameter, penetration depth and species types of dowel on the bending moment resistance of
19
corner joints fabricated with dowel in the case-type furniture. Iranian Journal of wood and
20
paper Science Research. 28(1): 11-23. (In Persian).
21
[10] Dalvand, M., Ebrahimi GH., Tajvidi, M., Layeghi, M. 2013. Bending moment resistance
22
of dowel corner joints in case-type furniture under diagonal compression load. Journal of
23
Forestry Research. Accepted for publication.
24
[11] Heydari, H. 2011. Fabricating a wooden bearing for combine and evaluating its
25
functionality. MS.C Thesis, Department of wood and paper Science and Technology. Faculty
26
of Nature Resource, University of Tehran. (In Persian).
27
ORIGINAL_ARTICLE
بررسی مقاومت کششی انواع اتصالهای ثابت و بازشونده در تخته فیبر با دانسیته متوسط
در این تحقیق به اندازه گیری و مقایسه مقاومت کششی اتصال های جداشدنی و ثابت استفاده شده برای اتصال دو قطعه چند
به یکدیگر، شامل اتصال گوشه ای فلزی و الیت، دوبل (Medium Density Fiberboard) سازه تخته فیبر با متوسط
چوبی، پیچ و بیسکویت چوبی، پرداخته شده است.
20cm×18/4cm به ابعاد MDF از دو قطعه ،L نمونه های مورد آزمایش به شکل ، D1761, ASTM برابر استاندارد
ساخته شدند، تکرار در نظر گرفته شده برای هر تیمار 5 نمونه می باشد. هشتاد نمونه مورد بررسی در این مقایسه و ارزیابی
10 آغشته شده با چسب پلی وینیل mm 8و mm عبارتاند از: اتصال های ثابت شامل اتصال دوبل چوبی آجدار با قطرهای
50 ، اتصال بیسکویت چوبی شماره 10 آغشته شده با چسب پلی وینیل استات و mm 40 و mm استات، اتصال پیچ با طول های
10 و اتصال جداشدنی فلزی mm 8و mm اتصال های جداشدنی شامل اتصال الیت ، اتصال الیت تقویت شده با دوبل به قطرهای
10 . در اتصال های ثابت جهت بررسی تاثیر روکش، از صفحه- mm 8و mm با خار و بدون خار تقویت شده با دوبل به قطرهای
با روکش و بدون روکش استفاده شد. MDF های
بنا بر نتایج به دست آمده مقاومت اتصال گوشه ای جداشدنی خاردار بیشتر از اتصال گوشه ای جداشدنی بدون خار می باشد،
8 و اتصال الیت mm 10 بیشتر از اتصال الیت با دوبل mm همچنین مقاومت اتصال گوشه ای جداشدنی اتصال الیت با دوبل
8 است. مقاومت اتصال ثابت mm 10 بیشتر از مقاومت اتصال ثابت دوبل mm بدون دوبل می باشد. مقاومت اتصال ثابت دوبل
4 بدون روکش می باشد. بالاترین میزان مقاومت دراتصال گوشه ای cm 5 بدون روکش نیز بیشتر از مقاومت پیچ cm پیچ
5 بدون روکش دارای بالاترین مقاومت است. cm 8 تشخیص داده شد. در اتصال های ثابت اتصال پیچ mm خاردار با دوبل
84 درصد در بهبود مقاومت اتصال پیچ تاثیر گذار هستند.بر پایه نتایج به / 90 و 1 / طول پیچ و روکش به ترتیب به میزان 4
5 بدون cm 2434/93 نیوتن) و اتصال پیچ ) 8mm دست آمده همچنین دو تیمار اتصال جداشدنی خاردار با دوبل
31545 نیوتن) برتر تشخیص داده شدند. / روکش( 76
https://www.ijwp.ir/article_11504_069ea1f433b6c751223a7dcae82a0ddc.pdf
2012-01-01
49
63
اتصال جداشدنی
اتصال ثابت
مقاومت در برابر بار کششی
تخته فیبر دانسیته متوسط
محمد
غفرانی
ghofrani@sru.ac.ir
1
استادیار،گروه صنایع چوب دانشکده مهندسی عمران دانشگاه تربیت دبیر شهید رجایی
AUTHOR
حبیب
نوری
2
کارشناس ارشد گروه صنایع چوب دانشکده مهندسی عمران دانشگاه تربیت دبیر شهید رجایی
LEAD_AUTHOR
حسین
حسینخانی
3
مربی پژوهشی، بخش تحقیقات علوم چوب و فراوردههای آن، مؤسسه تحقیقات جنگلها و مراتع کشور
AUTHOR
] Ebrahimi G. 2007. Structural Engineering Design Furniture. Tehran university press.
1
Tehran, Iran, 647 p. (in persion)
2
[2] Esfandyari A. taghavinegad B. 2007. Study of Furniture Industry and wooden
3
construction. Non-metal industry office Ministry of Industries and Mines, 815p. (in persian)
4
[3] Smardzewski, J., and Prekard S., 2002. Stress Distribution in Disconnected Furniture
5
Joints, Electronic Journal of Polish Agricultural Universities 7 (1) 503-509
6
[4] Rajak Z. I. B. H. A. and Eckelman C. A., 2001. Lecturer, Dept . of Wood tech., MARA
7
Institue of Technology, Malaysia.
8
[5] Grbac I., Tkales S., Tvelic Z., 2002. Testing the strength of beech (fagus sylvatica L.) and
9
pine (pinus sylvatica L) corner joints, drvana industriga 48(4): 195-204
10
[6] Smardzewski, J., and ozarska, B., 2002. Rigidity of cabinet furniture with semi-riged
11
joints of the confirmat type, Electronic Journal of Polish Agricultural Universities 9(2): 1328-
12
[7] Ho,C., and Eckelman A., 2004. Use of performance tests in evaluating joint and fastener
13
strength in case furniture, Forest Products Journal 11(3): 294-303
14
[8] Guntekin, E., 2004. Performances of furniture joints ready for fitting. Wood Technic
15
(5):17–21
16
[9] Ghofrani, M. Noori, H. 2006. Lateral holding strength of wooden dowel, screw and readyto-
17
assemble joints constructed of medium density fiber board, Iranian journal of wood and
18
paper science research 24 (2), 231-243 (in persian)
19
[10] Smardzewski, J. Papuga T., 2004. Stress Distribution In Angle Joints Of skeleton
20
furniture, Electronic Journal of Polish Agricultural Universities 18(1):90–98.
21
[11] Atar, M., Ozcifci, A., Altinok, M. and Celikel, U., 2008. Determination of diagonal
22
compression and tension performances for case furniture corner joints constructed with wood
23
biscuits, Materials and Design (30): 665-670
24
[12] Altinok, M., Huseyin Tas, H. and Cimen, M. 2008. Effects of combined usage of
25
traditional glue joint methods in box construction on strength of furniture, Materials and
26
Design (30) 3313–3317
27
62 بررسی مقاومت کششی انواع اتصالهای ثابت و بازشونده در…
28
[13] liu, W., eckelman A. 1998. Effects of number of fasteners on the strength of corner joints
29
for cases. Forest Products Journal. 48,(1) 93-95
30
[14] ozarska B., smardzewski j. 2005. Rigidity of cabinet furniture with semi-riged joints of
31
the confirmat type, Materials and Design, 55: 56-63
32
[15] Atar, M. and Ozcisfi A., 2007. The effects of screw and back panels on the strength of
33
corner joints in case furniture, Materials and Design 56 (4) 35-40.
34
[16] Tankut, N. A. and tancut N., 2009. investigationsthe effects of fastener, glue and
35
composite material types on the strength of corner joints in case-type furniture construction,
36
Materials and Design 29 (3) 519–525
37
[17] Ho C., Eckelman A., 2001. use of performance tests in evaluating
38
ORIGINAL_ARTICLE
بررسی تأثیر ضخامت شانهی بالای کام بر ظرفیت لنگر خمشی اتصال کام و زبانه سیار
در این تحقیق تأثیر ضخامت شانهی بالای کام در پنج اندازهی 5
35 و 40 میلیمتر بر ظرفیت ،30 ،25 ، 30 و 35 میلیمتر و ارتفاع زبانهی سیار نیز در پنج اندازهی 20 ،25 ،20 ، اندازههای 15
لنگر خمشی اتصال کام و زبانه سیار بررسی شدهاست. همچنین به منظور بررسی تأثیر گونهی چوب مورد استفاده برای ساخت
زبانهی سیار بر ظرفیت لنگر خمشی اتصال از چوب گونههای راش، گردو، بلوط، چنار، صنوبر و نراد استفاده شدهاست. با در
شکل با روشی یکسان و با استفاده از چسب پلیوینیل استات T نظر گرفتن 5 تکرار برای هر تیمار در مجموع 100 اتصال
18 میلیمتر / 1 تا 5 / ساخته شد و مورد آزمایش قرار گرفت. بنابر نتایج، با افزایش ضخامت شانهی بالای کام از 5 (PVAc)
میانگین ظرفیت لنگر خمشی به طور پیوسته به میزان 50 درصد کاهش یافتهاست. با افزایش طول نفوذ زبانهی سیار از 15 تا
30 میلیمتر ظرفیت لنگر خمشی افزایش و از 30 تا 35 میلیمتربه دلیل افزایش همزمان ضخامت شانه ظرفیت لنگر خمشی
اتصال کاهش یافتهاست. ارتفاع زبانهی سیار تاثیر ویژهای بر ظرفیت لنگر اتصال از خود نشان داد به گونهای که با افزایش
ارتفاع زبانهی سیار ظرفیت لنگر اتصال به طور پیوسته افزایش پیدا کردهاست. تأثیر گونهی چوب مورد استفاده برای ساخت
زبانهی سیار بر ظرفیت لنگر خمشی اتصال معنیدار بوده و زبانهی ساخته شده از چوب راش بیشترین ظرفیت لنگر خمشی را
از خود نشان دادهاست.
https://www.ijwp.ir/article_11505_a9bc0a7a7a38e2b4b59a2b7bd00c4c89.pdf
2012-01-01
65
75
شانهی بالای کام
اتصال کام و زبانه سیار
ظرفیت لنگر خمشی
چسب پلی وینیل استات
محمد
دریکوند
1
دانشجوی کارشناسی ارشد،گروه علوم و صنایع چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه تهران
LEAD_AUTHOR
قنبر
ابراهیمی
ghanbar.ebrahimi@ut.ac.ir
2
استاد، گروه علوم و صنایع چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه تهران
AUTHOR
کارل
آلبرت اکلمن
3
استاد علوم چوب، دانشکده جنگل و منابع طبیعی، دانشگاه پوردو، آمریکا
AUTHOR
1] Derikvand, M., Ebrahimi, Gh., Eckelman, C.A. 2012. The effect of geometric shape of
1
loose tenon on bending strength of mortise and loose tenon joint. Iranian Journal of Wood
2
and Paper Science Research. Accepted for publication. (In Persian).
3
[2] Tankut, A.N., Denizli, N. 2004.The Effects of joint Forms (Shape) and Dimensions on the
4
Strengths of Mortise and Tenon joints. Turkish Journal of Agriculture & Forestry. 29:493–8.
5
[3] Eckelman, C.A., E. Haviarova, Y. Erdil, H. Akcay, A. Tankut, N. Denizli. 2004. Bending
6
moment capacity of round mortise and tenon furniture joints. Forest Products Journal. 54:
7
[4] Hill, M.D., Eckelman, C.A. 1973. Mortise and Tenon joint: Flexibility and Bending
8
Strength of Mortise and Tenon joints. Furniture Design & Manufacturing. 45:54-62.
9
[5] Vesi, J., Ebrahimi, Gh., Bahmani, M. 2010. A study of the effects of height and thickness
10
of tenon made out of beech and hornbeam on bending strength of mortise and tenon joint.
11
Iranian Journal of Wood and Paper Science Research. 25(1): 128-137. (In Persian).
12
[6] Bahmani, M., Ebrahimi, Gh., and Fathi, L. 2009. Predicting of withdrawal strength with
13
dowel joint in medium density fiber (MDF) by mathematic model. Iranian Journal of Wood
14
and Paper Science Research, 24(1): 117-124. (In Persian).
15
74 بررسی تأثیر ضخامت شانهی بالای کام بر ظرفیت لنگر خمشی...
16
[7] Aman, R. L., West, H. A., & Cormier, D. R. 2008. An evaluation of loose tenon joint
17
strength. Forest Products Journal. 58(3), 61-64.
18
[8] Derikvand, M. 2011. Mortising jig, Iranian patent, 720171.
19
[9] Eckelman, C.A. 1970. Chair stretchers and spindles prove tough after testing. Furniture
20
design and manufacturing. 42: 220-223.
21
[10] Eckelman, C.A. 2003. Textbook of product engineering and strength design of furniture
22
Purdue Univ. West Lafayette, IN.
23
[11] Eckelman, C.A., Erdil, Y.Z., and J. Zhang. 2002. Withdrawal and Bending Strength of
24
Dowel Joints Constructed of Plywood and Oriented Strand Board. Forest Products Journal.
25
52(9):66-74.
26
[12] Erdil, Y.Z., and J. Zhang. 2002. Bending moment capacity of rectangular mortise and
27
tenon furniture joints. Forest Products Journal. 55(12):209-213.
28
[13] Tankut, N. 2006. The Effect of Adhesive Type and Bond Line Thickness on the
29
Strength of Mortise and Tenon joints. International Journal of Adhesion & Adhesive: pp. 1-6.
30
ORIGINAL_ARTICLE
(Paulownia fortunei) ارزیابی تاثیر نانو اکسیدروی بر خواص فیزیکی و مکانیکی چوب پالونیا
در این تحقیق خواص فیزیکی(واکشیدگی حجمی و جذب آب درازمدت) و مکانیکی (سختی، فشارموازی الیاف، مدول خمشی
10 ) بررسی گردید. نمونه ها با محلول -80nm و مدولالاستیسیته)، چوب پالونیای اشباع شده با نانواکسیدروی(اندازه
2 بار در مخزن فشار به مدت 20 دقیقه به روش سلول تهی اشباع / 5000 و تحت فشار 5 ppm نانواکسیدروی با غلظت
شدند. نتایج نشان دادند که مدول خمشی، مدول الاستیسیته و فشارموازی الیاف نمونههای اشباع شده افزایش یافتند. بین
خواص مکانیکی، تفاوت معنیداری درسختی چوب شاهد با نمونههای اشباع شده مشاهده نشد که میتوان آنرا به بلندشدن
الیاف سطحی نمونهها در اثر غوطهوری در محلولهای اشباع دانست. بیشترین واکشیدگی حجمی و جذب آب مربوط به 8
ساعت اول بوده است. نتایج نشان دادند که اشباع چوب با نانو اکسید روی تاثیر مثبت معنیداری بر کاهش تغییرات ابعاد و
جذب آب نمونهها داشته است.
https://www.ijwp.ir/article_11506_e33e9ca29f8aef5ae9fa1cd520490f36.pdf
2012-01-01
77
85
نانو اکسید روی
پالونیا
واکشیدگی حجمی
جذب آب
خواص مکانیکی
مریم
قربانی کوکنده
1
استادیار دانشکده منابع طبیعی دانشگاه علوم کشاورزی و منابع طبیعی ساری
AUTHOR
ملیحه
اختری
2
استادیارگروه علوم و صنایع چوب و کاغذ، دانشگاه آزاد اسلامی واحد بجنورد
LEAD_AUTHOR
حمیدرضا
تقی یاری
3
استادیار گروه صنایع چوب، دانشکد هی مهندسی عمران ، دانشگاه تربیت دبیر شهید رجائی
AUTHOR
[1] Siegel, R W, Hu, E, Roco, M C, eds. 1999. Nanostructure Science and Technology.
1
Springer (former Kluwer Academic Publishers): Dordrecht, Netherlands
2
[2] Evans, P D, Matsunaga, H, Kiguchi, M. 2008. Large-scale application of nanotechnology
3
for wood protection. Nature Nanotechnology 3(10), 577.
4
[3] Taghiyari, H. 2010. Study on the Effect of Nano-Silver Impregnation on Mechanical
5
Properties of Heat Treated Populus nigra.Wood Sci Technol. DOI 10.1007/s00226-010-
6
[4] Taghiyari, H., Rangavar,H. and Farjpour, O. 2011. Effect of Nano-Silver on production
7
of hot-pressing and improvement in physical and mechanical properties of particleboard.
8
Bioresources. 6(4): 4067-4075.
9
[5] Ghorbani, M., Akhtari, M., Taghiyari, H.R. and Kalantari, A. 2012. Effects of silver and
10
zinc-oxide nanoparticles on gas and liquid permeability of heat-treated Paulownia wood.
11
Austrian Journal of Forest Science. 129(1): 106 – 123.
12
[6] Ellis, J.R .,2007. Silver as a wood presertive. Enviormental requirement and concerns.
13
IRG on Wood protection Doc. No. IRG/WP 07-30420
14
[7] McIntyre, C. R. 2010. Comparison of Micronized Copper Particle Sizes, IRG/WP 10-
15
30538, 41st IRG/WP conference Annual Meeting,Biarritz, France.
16
[8] Cooper, P.A. & Ung, T.Y. 2009. Component leaching from CCA, ACQ and a micronized
17
copper quat (MCQ) system as affected by leaching protocol. Int. Res. Group on Wood Prot.
18
Doc. IRG/WP 09-50261.
19
[9] Freeman, M.H. & McIntyre, C.R. 2008. A comprehensive review of copper-based wood
20
preservatives with a focused on new micronized or dispersed copper systems. Forest Products
21
J., 58(11): 6-27.
22
[10] Cayton, R H, Sawitowski, T. 2006. The impact of nano-materials on UV-protective
23
coatings. http://www.nsti.org/Nanotech2006/showabstract.html?absno=854. 18/02/2010
24
[11] Clausen, C.A., 2007. Nanotechnology: Implications for the Wood Preservation Industry.
25
International Research Group on Wood Protection, Stockholm,Sweden, IRG/WP/07-30415.
26
[12] Taghiyari, H.R. 2011 Effects of nano-silver on gas and liquid permeability of
27
particleboard. Digest Journal of Nanomaterials and Bioresources, Vol. 6, No 4, October-
28
December, p. 1517 – 1525.
29
[13] Matsunaga, H, Kiguchi, M, Evans, P. 2007. Micro-Distribution of Metals in Wood
30
Treated with a Nano-Copper Wood Preservative. International Research Group on Wood
31
Protection.
32
[14] Severa, L., Buchar J., Krivanek I., 2003. The influence of the moisture content on the
33
fracture of the notched wood beam. 8th International IUFRO Wood Drying Conference
34
[15] Kalaycioglu, H., Deniz, I., Hiziroglu, S. 2005. Some of the properties of particleboard
35
made from paulownia. J. Wood Sci. 51: 410-414.
36
[16] Flynn H, Holder C (2001). Useful wood of the world. Forest Products Society 2nd Ed.,
37
Madison, WI, 618p.
38
ارزیابی تاثیر نانو اکسیدروی بر خواص فیزیکی و مکانیکی...
39
[17] Baronas R., Ivanauskas F., Juodeikienė I., Kajalavicius A., 2001. Modelling of Moisture
40
Movement in Wood during Outdoor Storage. Nonlinear Analysis: Modelling and Control,
41
6(2), 3-14.
42
[18] Yang, R, Li, Y, Yu, J (2005): Photo-stabilization of linear low density polyethylene by
43
inorganic nano-particles. Polymer Degradation and Stability, 88(2), 168-174.
44
ORIGINAL_ARTICLE
امکانسنجی کاربرد ضایعات اسکناس باطله در ساخت صفحات فشرده چوب-گچ
در این تحقیق امکانسنجی کاربرد ضایعات اسکناس باطله در ساخت صفحههای فشرده چوب گچ مورد بررسی قرار گرفت.
30 و 40 درصد جرم خشک خرده چوب و میزان گچ در ، بدین منظور خرده های کاغذ اسکناسهای باطله در سه سطح 20
2 و 3 برابر جرم خشک مواد چوبی و نوع تخته در دو سطح همسان و سه لایه به عنوان عاملهای متغیر /75 ،2/ سه سطح 5
در نظر گرفته شدند. گچ مورد استفاده در این تحقیق از نوع ساختمانی (جبل گچ) بوده و تخته های آزمونی با ضخامت 16
میلیمتر و جرم مخصوص 1 گرم بر سانتیمتر مکعب ساخته شدند. نمونه های آزمونی برای بررسی خواص فیزیکی و مکانیکی
تهیه شدند. نتایج به دست آمده نشان داد افزایش مقدار اسکناس باطله سبب کاهش EN تخته ها برابر استاندارد 312
مقاومتهای خمشی و چسبندگی درونی تخته ها میشود. مقاومت خمشی تخته های سه لایه (ضایعات اسکناس در لایه
میانی) در مقایسه با تخته های همسان، بیشتر و لیکن، مقاومت چسبندگی درونی تختههای همسان از سه لایه بالاتر بود.
2 برابر جرم مواد چوبی، سبب افزایش مقاومت خمشی شده و مقاومت چسبندگی داخلی تا 3 برابر / افزایش میزان گچ تا 75
وزن مواد چوبی همواره افزایش می یابد. افزایش میزان اسکناس و گچ سبب کاهش مقدار واکشیدگی ضخامت و جذب آب
تخته ها شد. به طور کلی میتوان گفت که کاربرد 20 تا 30 درصد ضایعات اسکناس باطله به جای ذرات چوبی درساخت
2 برابر نسبت به جرم خشک مواد چوبی، می تواند مورد استفاده قرار گیرد. / تختههای چوب گچ همسان و با میزان گچ 75
https://www.ijwp.ir/article_11508_77137b6ddfa717ee87a12889cb598d9f.pdf
2012-01-01
87
99
ضایعات اسکناس باطله
پانل های چوب گچ
خواص فیزیکی و مکانیکی
حسین
رنگ آور
hrangavar@yahoo.com
1
استادیار گروه صنایع چوب، دانشگاه تربیت دبیر شهید رجایی، تهران، ایران
LEAD_AUTHOR
[1] Doost Hosseini, K, 2007. Wood composite materials, Manufacturing, Aplications. 2nd ed.
1
University of Tehran, 708 p.
2
[2] Habibi, J. 2011. Study on nanosilver treatment on physical and mechanical properties of
3
MDF panels made from waste of banknote, M.Sc. Thesis, Department of wood science and
4
technology, Shahid Rajaee Teacher Traning University, 129 pages. (In Persian)
5
[3] Enayati, A.A. and Hosseinaei, O., 2007.Utilization of Recycled Banknote in
6
Manufacturing Particleboard, Iranian Journal of Natural Resurces, 60(3):1023-1036. (In
7
[4] Pourjozi Kalesara, M. and Ebrahimi, GH., 2002. Important differences in Some
8
Properties of Gypsumboard reinforced with two types of natural fibers (Bagasse and Wood),
9
Polymer science and technology, 15(4):237-243 . (In Persian)
10
[5] Deng, Y., and Furuno, T. 2002. Study on gypsum bonded particleboard reinforced with
11
jute fiber, Holzforschuag, 56:440-445
12
[6] Deng, Y., and Furuno, T. 2001. Properties of gypsum Particleboard reinforced with
13
polypropylene fiber, Journal wood Sci. 47: 445-450
14
[7] Deng, Y., Furuno, T. and Uehara, T. 1998. Improvement of the properties of gypsum
15
particleboard by adding cement, Jurnal wood Sci. 44:98-102
16
[8] Sadeghifar, H. and Resalati, H., 2007. Research on Recycling and Deinking of Money
17
Paper, Iranian Journal of Natural Resurces, 59(4):953-961. (In Persian)
18
ORIGINAL_ARTICLE
بررسی و تعیین عاملهای موثر بر تقاضای واردات الوار در ایران
با توجه به محدودیت منابع جنگلی در ایران ، واردات چوب های خام و برش خورده ، راه حلی اجتناب ناپذیر برای تامین نیاز
های صنایع روبه گسترش چوبی می باشد . بنابر این در این نوشتار با بررسی روند واردات چوبهایالواری در کشور بر پایه
1363 و با استفاده از - الگوی معادله ی رگرسیونی تک معادله و با استفاده از داده های دورههای زمانی سالهای 1388
مهمترین متغیرهای موثر بر میزان تقاضا برای واردات این ماده اولیه مهم و ، (OLS) روش سیستم حداقل مربعات معمولی
پر مصرف و میزان تاثیر گذاری هر یک از عاملهای موثر، به طور دقیق تعیین میشود. شکل تابعی مدل مورد استفاده یک
مدل رگرسیون خطی لگاریتم – لگاریتمی می باشد. نتایج به دست آمده از برآورد تابع تقاضای واردات در سطح 5 درصد
نشان می دهد که عرض از مبداء و میزان تولید ناخالص داخلی و درآمدهای نفتی کشور بر میزان تقاضای واردات الوار تاثیر
مثبت دارند. و نرخ ارز، میزان تولید داخلی بر میزان تقاضای واردات چوبهای گرد تاثیر منفی دارند . تاثیر منفی نوسان قابل
توجه نرخ برابری ارزهای مهم در قبال ریال در ماههای اخیر برروی واردات چوبهای الواری مانعی مهم در گسترش صنایع
چوبی در کشور به شمار میآید. همچنین نتایج نشان میدهد که میزان واردات چوبهای الواری با یک وقفه در سطح 5 درصد
معنیدار نشده و لذا متغیری تاثیرگذار بر میزان تقاضای واردات الوار به شمار نمیآید. علت را بایستی در نقش بی بدیل
الوارهای وارداتی در تامین نیازهای صنایع گوناگون سلولزی کشور دانست.
https://www.ijwp.ir/article_11515_cd02ba79911398d51cf957987d6a2fd1.pdf
2012-01-01
101
116
چوبهای الواری
واردات
روش حداقل مربعات معمولی
آزمون دیکی فولر تعمیم یافته
آزمون فیلیپس
پرون
امیر
ملاحسنی
1
دانش آموخته دوره کارشناسی ارشد،دانشگاه آزاد ا سلامی ، واحد کرج ، گروه علوم و صنایع چوب وکاغذ ، کرج ،
AUTHOR
آژنگ
تاج دینی
2
دانشیار دانشگاه آزاد ا سلامی ، واحد کرج ، گروه علوم و صنایع چوب وکاغذ ، کرج
LEAD_AUTHOR
مهران
روح نیا
mehran.roohnia@kiau.ac.ir
3
دانشیار دانشگاه آزاد ا سلامی ، واحد کرج ، گروه علوم و صنایع چوب وکاغذ ، کرج
AUTHOR
[1] Association of Iran Wood Industries Employers. 2009. Statistics of import and export for
1
all kinds paper, wood-based panels and round wood in
2
http://www.iranwoodind.com/main_fa.asp. (in Persian).2008,
3
[2] Shoeibi, S.H., Heshmatol Vaezin, S.M. , Amiri, S, and Shamekhi, T. 2010, Impact of
4
wood import tariff on illegal wood logging in Northern Caspian Forests, Iranian , Journal
5
of Forest, l2 ( 1):13-24 (In Persian).
6
[3] Koushkizamani, M. 2007. Investigation of import and export of wood and wood products
7
in Iran’s custom, M.Sc. Thesis, Department of wood and Paper Science and Technology,
8
University of Tehran, 150 pages (In Persian).
9
[4] Gonzales, R.W., Saloni, D., Dasmohapatra, S., and Cubbage, F. 2008. South
10
America :Industrial roundwood supply potential , BioResources,3(1):255-269
11
بررسی و تعیین عاملهای موثر بر تقاضای...
12
[5] MarviMohajer, M.R. 2005.Silvicualture, Tehran university Publications, Trhran, Iran,
13
387p (In Persian).
14
[6] Mollahassani,A.2011.Investigation of influencing factors on demand for imports of
15
Roundwood, M.S.c. Thesis, Department of Wood and Paper Science and Technology,
16
Islamic Azad University, 110 pages (In Persian).
17
[7] Saberi, B.1995. Demand for imports function of some goods. M. Sc. Thesis,Department
18
of Industrial Management, Tehran University. 114 Pages (In Persian).
19
[8] Tofighi, H. and Mehrabian.A.2002.Investigation of effective factors on demand for
20
import functions of consumer , capital and intermediate goods,Journal of Economic
21
Research, 413):54-74(In Persian).
22
[9] Nasrollahi,M.2004. Aggregate demand import function for Iran: A re-evaluation with
23
bounds testing approach. Economic Researches,?(66):91-112 ( In Persian).
24
[10] Tashkini, A. and Bastani.A.2006.Estimation of demand for import function for Iran‘s
25
economic. Journal of Trade Studies, 10(40):205-226(In Pesian).
26
[11] Bayatkashkoli,A.,Rafie,A.,Azizi, M.,Amiri, S., and Kabourani. A. 2007. Estimaton of
27
future trend of Wood products import and export,Journal of Agriculture and Natural
28
Resources,15(1):73-83 (In Persian).
29
[12] Bayatkashkoli,A.,2010. Studying Imports of Wood, Paper and their Products in the
30
World and Iran from 1998 to 2007, Iranian Journal of Wood and Paper Industries,1(2):37-
31
54(In Persian).
32
[13] Mohammadi Limaei, S., Heybatian, R., Heshmatol Vaezin,S.M. and Torkman, J., 2011.
33
Wood import and export and its relation to major macroeconomics variables in Iran.
34
Forest Policy and Economics, 13 (2011):303-307
35
[14] Tajdini,A.,Mofrad,H.,Latibari,A.J., and Roohnia,M.2011.Analysis of wood-based
36
panels to Iran: simultaneous equations model approach, African Journal of Business
37
Management,5(34):13169-13175
38
[15] Yoshimoto .A., and Yukutake, K. 2002. Japanese forest sector modeling a partial
39
equilibrium market model .Journal of Forest Research, 7(1):41-48.
40
[16] Chunquan,Z.H.Talor,R. and Guoqiang,F.2004.Chnia‘s wood market, trade and the
41
environment science Press USA Inc,81p.
42
[17] Kangs, k., and Baudin. A. 2003. Modeling and projections of forest products demand,
43
supply and trade in Europe. Food and Agriculture organization of the United Nations.
44
Timber Committee.Geneva. 203pp.
45
[18] Gan,J.2004.Effects of China‘s WTO accession on global forest product trade, Forest
46
Policy and Economics, 6(4):509-519
47
[19] Zhang, J and Gan. J .2007. Who will Meet China‘s Import Demand for Forest Products
48
Journal of World Development, 35(12):2150-2160.
49
[20] Arabatzis, G. and Klonaris. S., 2009. An analysis of Greek wood and wood product
50
imports: Evidence from the linear quadratic aids, Forest Policy and Economics, 11(4):
51
[21] Department of Statistics and Information. 1978-2007. Iran Foreign Trade Annual Book.
52
Islamic Republic of Iran‘s Customs. 785pp (In Persian).
53
مجله صنایع چوب و کاغذ ایران، سال چهارم، شماره 1، بهار و تابستان 1392
54
[22] Calendar for National Statistics. 1978-2007. Report of Industrial products. Statistical
55
center of Iran.( http://amar.sci.org.ir). / (In Persian).
56
[23] Bureau Of Economic Accounts.1978-2007, Report of Economic and Balance Sheet of
57
Central Bank Of Iran, Central Bank of Islamic republic of Iran.232 pp (In Persian)
58
[24] Shirinbakhsh, S.h. and Khonsary, Z.H. 2005. Application of Eviews in Econometrics,
59
1st Ed, Economic Research Institute, Tehran, Iran, 247p (In Persian).
60
[25] Abrishami, H. 1999.Basic Econometrics, 2nd Ed. Tehran University Publications,
61
Tehran, Iran, 1065 p (In Persian).
62
[26] Baek, J., 2010. Are-examination of factors affecting Unites States softwood lumber
63
imports from Canada, paper presented at the Agricultural & Applied Economics
64
Association‘s 2010 AAEA, CAES&WAES Joint Annual Meeting,25-27 July, Denver
65
Colorado, United States of America, available at: ageconsearch. umn.
66
edu/bitstream/60930/2/PAPER (60930). pdf (accessed 25 March 2012).
67
[27] Abounuri, A.A., and Hamedani, A., 2010. Analysis and Investigation of the Relation
68
between Economic Growth and Gasoline and Gas Oil Demand in Iran's Transportation
69
System (Ground-Rout), Iranian Journal of Trade Studies, 14(57):115-154(In Persian).
70
[28] Toppinen A. 1998, Econometric models on finish round wood market, Ph.D Thesis,
71
Department of Forest Science, Helsinki University, 52 pages.
72
ORIGINAL_ARTICLE
بررسی انحلال و بازسازی مواد لیگنوسلولزی در حلالهای یونی 1-بوتیل- 3-متیل- 1-ایمیدازولیوم کلرید و -1 بوتیل- 3- متیل ایمیدازولیوم متیل سولفات و تعیین برخی از خواص فیزیکی و مکانیکی
در این بررسی از دو حلال یونی 1-بوتیل- 3-متیل- 1-ایمیدازولیوم کلرید
و سلولز استفاده شد. بررسی ها نشان داد که حلال CMP برای انحلال آرد چوب، خمیر کاغذ ([BMIM][MeSo سولفات ([ 4
قادر به انحلال مواد لیگنوسلولزی به طور کامل نیست و فرآوری با حلال سبب تشکیل ترکیبات تخریبی ([BMIM][MeSo4])
سبب انحلال مواد لیگنوسلولزی شد. چگالی، شفافیت، جذب آب و واکشیدگی BMIMCl محلول در آب گردید، اما فرآوری با
از آرد چوب نیز CMP و آرد چوب با اختلاف قابل ملاحظهای زیادتر و CMP ضخامت فیلمهای سلولزی بازسازی شده نسبت به
و آرد چوب داشتند.. مقاومت کششی، مدول CMP بیشتر بود. همچنین، فیلم سلولزی کمترین نفوذپذیری بخار آب نسبت به
و آرد چوب با اختلاف چشمگیری بیشتر بود. CMP یانگ و کرنش در نقطه شکست فیلم سلولزی نسبت به فیلم تهیه شده از
https://www.ijwp.ir/article_11516_f5492ff30fd2b5176a3c332292f537c3.pdf
2012-01-01
117
130
مواد لیگنوسلولزی
انحلال
حلال یونی
1-بوتیل- 3-متیل-ایمیدازولیوم کلرید
1-بوتیل- 3- متیل ایمیدازولیوم
متیل سولفات
خواص فیزیکی و مکانیکی
ابراهیم
حجتی مروست
1
دانشآموخته کارشناسی ارشد،گروه علوم و صنایع چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه تهران
AUTHOR
علی
عبدالخانی
abdolkhani@ut.ac.ir
2
استادیار،گروه علوم و صنایع چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه تهران
LEAD_AUTHOR
علی نقی
کریمی
akarimi@ut.ac.ir
3
استاد،گروه علوم و صنایع چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه تهران
AUTHOR
یحیی
همزه
hamzeh@ut.ac.ir
4
دانشیار، گروه علوم و صنایع چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه تهران
AUTHOR
[1] Han, S., Li, J., Zhu, S., Chen, R., Wu, Y., Zhang, X. and Yu, Z. (2009) Potential
1
applications of ionic liquids in wood related industries. BioResources, 4(2): 825-834.
2
[2] Liebert, T. and Heinze, T. (2008) Interaction of ionic liquids with polysaccharides. 5.
3
Solvents and reaction media for the modification of cellulose. BioResources, 3(2): 576-601.
4
[3] Xie, H., King, A., Kilpelainen, I., Granstrom, M. and Argyropoulos, D.S. (2007)
5
Thorough chemical modification of wood-based lignocellulosic materials in ionic liquids.
6
Biomacromolecules, 8(12): 3740-3748.
7
[4] Kilpeläinen, I., Xie, H., King, A., Granstrom, M., Heikkinen, S. and Argyropoulos, D.S.
8
(2007) Dissolution of wood in ionic liquids. Journal of Agricultural and Food Chemistry,
9
55(22): 9142-9148.
10
[5] Zhu, S., Wu, Y., Chen, Q., Yu, Z., Wang, C., Jin, S., Ding, Y. and Wu, G. (2006)
11
Dissolution of cellulose with ionic liquids and its application: a mini-review. Green Chem,
12
8(4): 325-327.
13
[6] Jiang, W., Sun, L., Hao, A. and Chen, J.Y. (2011) Regenerated cellulose fibers from
14
waste bagasse using ionic liquid. Textile Research Journal, 81(18): 1949-1958.
15
[7] Wang, J., Zheng, Y. and Zhang, S. (2010) The application of ionic liquids in dissolution
16
and separation of lignocellulose. SCIYO COM: 71.
17
[8] Pu ,Y., Jiang, N. and Ragauskas, A.J. (2007) Ionic liquid as a green solvent for lignin.
18
Journal of Wood Chemistry and Technology, 27(1): 23-33.
19
[9] Abdulkhani, A., Hojati Marvast, E., Ashori, A. and Karimi, A.N. (2013) Effects of
20
dissolution of some lignocellulosic materials with ionic liquids as green solvents on
21
mechanical and physical properties of composite films. Carbohydrate Polymers, 95(1): 57-
22
[10] Abdulkhani, A., Mirshokraie, S.A., Hamzeh, Y., Hejazi, S. and Nouri, A. (2011)
23
Elucidation of Chemical Structure of Wood Lignin by Dissolving in 1-Butyl-3-
24
methylimidazolium Chloride Ionic Liquid. Science and Technology, 24(4): 279-289.(In
25
[11] Pereiro, A.B., Verdía, P., Tojo, E. and Rodríguez, A. (2007) Physical properties of 1-
26
butyl-3-methylimidazolium methyl sulfate as a function of temperature. Journal of Chemical
27
& Engineering Data, 52(2): 377-380.
28
[12] Dadashi, S., Mousavi, S.M., D-Jomeh, Z.E. and Oromiehie, A. (2012) Films Based on
29
Poly (lactic acid) Biopolymer: Effect of Clay and Cellulosic Nanoparticles on their Physical,
30
Mechanical and Structural Properties. Science and Technology, 25(2): 127-136. (In Persian).
31
[13] Huddleston, J.G., Visser, A.E., Reichert, W.M., Willauer, H.D., Broker, G.A. and
32
Rogers, R.D. (2001) Characterization and comparison of hydrophilic and hydrophobic room
33
temperature ionic liquids incorporating the imidazolium cation. Green Chemistry, 3(4): 156-
34
[14] Lungwitz, R., Linder, T., Sundermeyer, J., Tkatchenko, I. and Spange, S. (2010)
35
Synthesis of chemisorbed imidazolium and phosphonium cations by reaction of ionic liquid
36
precursors with silica. Chemical Communications, 46(32): 5903-5905.
37
[15] Laxmeshwar, S.S., Madhu Kumar, D., Viveka, S. and Nagaraja, G. (2012) Preparation
38
and Properties of Biodegradable Film Composites Using Modified Cellulose Fibre-
39
Reinforced with PVA. ISRN Polymer Science, 2012.
40
[16] Wu, Y.-B., Yu, S.-H., Mi, F.-L., Wu, C.-W., Shyu, S.-S., Peng, C.-K. and Chao, A.-C.
41
(2004) Preparation and characterization on mechanical and antibacterial properties of
42
chitsoan/cellulose blends. Carbohydrate Polymers, 57(4): 435-440.
43
ORIGINAL_ARTICLE
بررسی اثر آزمون کهنگی تسریع شده بر سفتی کابینت MDF آشپزخانه
سازه های صفح های- مکعبی، اشکال پایه به کار رفته در تولید انواع قفسه و کابینت آشپزخانه می باشند. در این بررسی
ساخته و در معرض آزمون MDF قفسه های چهارگوش در اندازه واقعی کابینت آشپزخانه با استفاده از پیچ و دو نوع تخته
کهنگی زود هنگام (تسریع شده) قرار گرفتند. در کل 50 قفسه ساخته و آزمون شدند. 25 قفسه از تخته بدون روکش و بدون
نوار لبه چسبان و 25 قفسه دیگر که به عینه همانند بودند از تخته روکش ملامینه به همراه نوار لبه چسبان در لب ههای خود
ساخته شدند. در کل پنج تیمار (با احتساب شاهد) که به لحاظ مدت زمان قرار گیری در معرض آزمون کهنگی با یکدیگر
تفاوت داشتند بر روی قفس هها اعمال شد. سپس سفتی این کابین تها پس از اعمال بار در ناحیه کشسان اندازه گیری شد.
نتایج تحلیل های آماری نشان داد که تیمار با احتمال اطمینان 99 % اثر معنی داری بر تغییرات سفتی قفس ههای روکش ملامینه
نشان داد که (T و لبه چسبان شده دارد. مقایسه بین سفتی نمون ههای شاهد و نمون ههای تیمار شده در شدیدترین آزمون ( 5
به طور میانگین 10 % کاهش سفتی در تمامی کابین تها پس از اجرای آزمون کهنگی زودهنگام قابل پیش بینی است. این
و به مقدار تا حدودی برابر در مقایسه با نمون ههای شاهد خود دیده شد. با این MDF کاهش سفتی در هر دو نوع کابینت
وجود قفسه های ساخته شده از تخته های روکش ملامینه و لبه چسبان شده سفتی مطلق بیش از سه برابر نسبت به قفس ههای
همانند اما ساخته شده از تخت ههای بدون روکش و بدون نوار لبه چسبان هم در بین نمونه های شاهد و هم تیمار پنجم خود
نشان دادند که این امر ثابت می کند اثر روکش و نوار لب هچسبان بر افزایش سفتی سازه جعبه بسیار قابل توجه است.
https://www.ijwp.ir/article_11517_1e7e1af58368792676bf76aeadff3a69.pdf
2012-01-01
131
141
MDF واژگان کلیدی: سفتی
کابینت آشپزخانه
مبلمان
کهنگی زود هنگام (تسریع شده)
تخته
علی
فتح الله زاده
1
دانشجوی دکتری،رشته علوم و صنایع چوب و کاغذ، دانشکده مناب عطبیعی دانشگاه تهران
LEAD_AUTHOR
علی اکبر
عنایتی
2
استاد،رشته علوم و صنایع چوب و کاغذ، دانشکده مناب عطبیعی دانشگاه تهران
AUTHOR
یوسف
زیا اردیل
3
استاد رشته ف نآوری چوب و طراحی مبلمان، دانشگاه موولا، ترکیه
AUTHOR
مهدی
تجویدی
4
استادیار، رشته علوم و صنایع چوب و کاغذ، دانشکده مناب عطبیعی دانشگاه تهران
AUTHOR
[1] Eckelman C., Munz S., 1987 “Rational design of cases with front frames and semi-rigid
1
joints” Forest Product Journal, Vol. 37, No. 6:25-30
2
[2] Ho C.L., Eckelman C., 1994 “The use of performance tests in evaluating joints and
3
fasteners strength in case furniture“ Forest Product Journal, Vol. 44, No. 9 :47-53
4
[3] Luppold W. G. ; Bumgardner M. S., 2009 “The wood household furniture and kitchen
5
cabinet industries: A contrast in fortune” Forest Product Journal, Vol. 59, No. 11/12
6
[4] Eckelman C., Rabiej R., 1985 “A comprehensive method of analysis of case furniture”
7
Forest Product Journal, Vol. 35, No. 4:62-68
8
[5] Lin Shin-Chao, Eckelman C., 1987 “Rigidity of furniture cases with various joint
9
constructions” Forest Product Journal, Vol. 37, No. 1:23-27
10
[6] Tankut N., 2009 “Effect of various factors on the rigidity of furniture cases” African
11
Journal of Biotechnology, Vol. 8, No. 20:5256-5270
12
[7] Haji Abdul Rajak Z.I., Eckelman C., 1993 “Edge and face withdrawal strength of large
13
screws in particleboard and medium density fiberboard” Forest Product Journal, 43(4):25-30
14
[8] Haji Abdul Rajak Z.I., Eckelman C., 1996 “Analysis of corner joints constructed with
15
large screw” Journal of Tropical Forest Products. 2(1):80-92
16
[9] Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel
17
Materials, Annual Book of ASTM Standard, 04.10, D 1037-99, 2001
18
[10] Norbord, 2004 “Medium density fiberboard: How to use MDF screws, MDF from Start
19
to Finish” Technical Data Sheet. Composite Panel Assoc., Gaithersburg, MD
20
[11] McNatt J. D., Link C., 1989 “Analysis of ASTM D 1037 accelerated aging test” Forest
21
Product Journal, Vol. 39, No.10
22
[12] Cost: Wood-based panels: an introduction for specialists, Brunel University Press, 2010
23
p. 271-277
24
ORIGINAL_ARTICLE
تهیه وانیلین از مایع پخت کرافت گونه کاج آلدریکا
در این تحقیق برای تهیه وانیلین از محصول جانبی کارخانه های تهیه کاغذ، در آغاز لیگنین از مایع پخت کرافت گونه سوزنی
مورد بررسی قرار گرفت. (FT-IR) برگ کاج الداریکا بهدست آمد. ویژگی های آن با طیفسنجی مادون قرمز تبدیل فوریه
مقدار لیگنین رسوب داده شده، 27 % وزنی بر پایه وزن خشک چوب بود. سپس وانیل به روش اکسیداسیون لیگنین، تحت
و (FT-IR) فشار اکسیژن تهیه شد. وانیل به دست آمده بعد از خالصسازی با دو روش طیفسنجی مادون قرمز
4 % وزنی بر پایه / شناسایی و میزان آن تعیین شد. مقدار وانیل بهدست آمده 2 (HPLC) کروماتوگرافی مایع با کارایی بالا
وزن خشک لیگنین بود.
https://www.ijwp.ir/article_11518_22ffe1e9afdc5227d106fbd897073c37.pdf
2012-01-01
143
150
لیگنین
وانیلین
کاج الدریکا
طیفسنجی مادون قرمز
کروماتوگرافی مایع با کارایی بالا
سپیده
مقصودلوراد
1
دانش آموخته کارشناسی ارشد فیتو شیمی دانشگاه گلستان گرگان،
LEAD_AUTHOR
علیرضا
شاکری
2
دانشیار دانشکده شیمی پردیس علوم، دانشگاه تهران
AUTHOR
[1] Othmer K. 1999. Concise encyclopedia of chemical technology, 4nd ed. John wiley &
1
sons, New York, 12120p.
2
[2] Tanaka J. 1953. Degradation of lignin,11. Lignin, Mokuzai Gakkaishi: 1958, 4:34-37,
3
Chem. Abs. 23: 11410.
4
[3] Mirshokraie, S.A. 1981. Wood chemistry; Fundamental and Applications, Sjostrom E.
5
2nd ed., Academic Press, (NY): 285 pages. (Translated In Persion)
6
[4] Sadeghifar, H., Mirshokraie, S.A., 1382. Investigation of poplar lignin determination of
7
characteristics by H-NMR, Journal of Agricultural Sciences: 71-82. (In Persion)
8
[5] Lu, Z., Wu Q., and Mc Nabb S., 2000: Chemical coupling in wood fiber and polymer
9
composites: A review of coupling agents and treatments. Wood and Fiber Science 32 (1): 88-
10
[6] Ann-Sofi J., Anna-Karin N., and Ola W., 2008. Concentration and purification of lignin
11
in hardwood kraft pulping liquor by ultrafiltration and nanofiltration, Chemical Engineering
12
Research and Design 86: 1271-1280.
13
[7] Lin Y.S. and Dence C.V. 1992. Methods in lignin chemistry Springer-Verlag Berlin, New
14
York: 578p.
15
[8] Azadbakht, M, Ebrahimzadeh, M.A. and koolaiyan, S., 2005. Extraction of lignin from
16
wood dust and preparation of vanillin from it, Pharmaceutical Sciences, 2: 33-38.
17
[9] Araujo, Jose D. P., Grande, Carlos A, Rodrigues, Alirio E. 2010. Vanillin production
18
from lignin oxidation in a batch reactor, Chemical Engineering Research and Design 88:
19
1024-1032.
20
[10] Ola W. and Ann-Soffi, J., 2006. Separation of lignin in kraft cooking liquor from a
21
continuous digester by ultrafiltration at temperatures above 100 °C, Desalination 195: 187-
22
[11] Yong-Hong, L., Zhi-Hao, S., and Pu, Z., 2004. Determination of vanillin, Eugenol, and
23
Isoeugenol by RP-HPLC, Chromatographia 60: 709-713.
24
[12] Ola, W., Marie, L., and Ann-Sofi, J., 2006. Extraction of lignin and hemicelluloses from
25
kraft black liquor, Desallination 199: 413-414.
26
[13] Biljana, B., Sally, A.R., Richard S.R. and Rajai, H.A., 2007. Lignin modification in the
27
initial phase of softwood kraft pulp delignification with polyoxometalates (POMs),
28
Holzforschung 61: 731-736.
29
[14] Azadbakht, M., Ebrahimzadeh, M.A., Koolayian, S. 2003. Preparation of Vanillin from
30
lignin of wood dust and comparison of different extraction methods, Proceedings of third
31
world congress on medicinal and Aromatic plants for Human walfare (WOCMAP,
32
Thailand):pp. 3-7.
33
[15] Herrmann, A. and Stockli, M., 1982. Rapid control of vanilla-containing products using
34
high-performance liquid chromatography, J. Chrom., 246: 313-316.
35
ORIGINAL_ARTICLE
(Populus nigra) تأثیر تیمار بخارگرمایی بر میزان نفوذپذیری گازی گونه چوبی تبریزی
مورد بررسی قرار (Populus nigra) در این تحقیق، تأثیر تیمار بخارگرمایی بر میزان نفوذپذیری گازی گونه چوبی تبریزی
2 بار قرار - 5 تحت تیمار گرمایی با بخارآب با میانگین فشار 3 ×5×15 cm گرفت. به منظور انجام این تحقیق، تختههایی به ابعاد
160،140،120 و 180 و 3 دامنه زمانی 2،1 و 3 ساعت انجام شد. سپس از تختههای ºC گرفتند. تیمارها در 4 دامنه دمایی
10 با مته گردبر تهیه و میزان نفوذپذیری گازی آنها در جهت mm 18 و طول mm تیمار شده نمونههای استوانهای به قطر
140 تأثیری بر ضریب نفوذپذیری گازی ºC 120 و ºC عرضی اندازهگیری شد. نتایج نشان داد که تیمار بخارگرمایی در دمای
180 موجب کاهش نفوذپذیری آنها شد. تفاوت معنیداری در سطح اعتماد ºC 160 و ºC نمونهها نداشته است ولی در دمای
95 درصد بین مدت زمانهای مختلف تیمار بخارگرمایی ( 1،2 و 3 ساعت) دیده نشد.
https://www.ijwp.ir/article_11519_031837439a166744b3e7c04169a8a05a.pdf
2012-01-01
151
159
تبریزی
تیمار بخارگرمایی
نفوذپذیری گازی
مائده
سیار
1
دانشجوی کارشناسی ارشد،گروه علوم و صنایع چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه تهران
LEAD_AUTHOR
اصغر
طارمیان
2
دانشیار،گروه علوم و صنایع چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه تهران
AUTHOR
محمد
آزادفلاح
adfallah@ut.ac.ir
3
استادیار گروه علوم و صنایع چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه تهران
AUTHOR
حمیدرضا
تقی یاری
4
استادیار گروه صنایع چوب، دانشکد هی مهندسی عمران، دانشگاه تربیت دبیر شهید رجایی
AUTHOR
[1] Siau J.F. 1984. Transport processes in wood. Springer, Berlin, Heidelberg, Newyork 245.
1
[2] Bao f., lu J.1999. On permeability of main wood species in china. Holzforschung 53: 350-
2
[3] Tarmian A., Perre P. 2009. Air permeability in longitudinal and radial directions of
3
compression wood of Piceaabies L. and tension wood of Fagus sylvatica L. Holzforschung,
4
Vol. 63: 352-356.
5
[4] Cai L. 2006. Using steam explosion to improve the durability of wet pocket wood. Forest
6
Products Journal. 56(7/8):75-78.
7
[5] Kubinsky E. 1971. Influence of steaming on the properties of Quercus rubra L. Wood.
8
Holzforschung 25(3):78-83.
9
[6] Zhang Y. Cai L. 2006 .Effects of steam explosion on wood appearance and structure of
10
sub alpine fir. Wood Sci Technol 40: 427–436.
11
[7] Vinden P. Torgovnikov G. 2000.The physical manipulation of wood properties using
12
microwave. In Proc. International conference of IUFRO. eds. Tasmania, Australia.
13
[8] Cai L., Oliveira LC .2007. Gas permeability of wetwood and normal wood of sub-alpine
14
fir in relation to drying. Dry Technol 25:501–505.
15
[9] Dashti H. 2011. The effect of pre-steaming and microwave treatment on properties of
16
physical and Chemical variations of Fir wood after drying, M. Sc. Thesis, Department of
17
wood and paper science and tech, Tehran university, 55 pages.(In Persian)
18
[10] Garrot G., Domĺnguez H., Parajό J.C. 1999. Hydrothermal processing of lignocellulosic
19
materials. HolzalsRoh-und Werkstoff, 57(3):191-202.
20
[11] Boonstra M.J., Rijsdijk J.F., Sander C., Kegel E., Tjeerdsma B., Militz H., Van acker J.,
21
Stevens M. 2006. Microstructural And Physical Aspects Of Heat Treated Wood. PART1.
22
SOFTWOODS. Maderas. Ciencia y tecnología8(3): 193-208.
23
[12] Tjeerdsma B., Boonstra M., Militz H. 1998b. Thermal modification of non-durable
24
wood species Part2. Improved wood properties of thermally treated wood. International
25
research Group on wood Pre. N IRG/WP 98-40124
26
[13] Tjeerdsma B., Stevens M., Militz H. 2000. Durability aspects of hydrothermal treated
27
wood, International Research Group Wood Pre, Section 4-Processes, N IRG/WP 00-40160
28
[14] Tjeerdsma B.F., Militz H. 2005. Chemical changes in hydrothermal treated wood: FTIR
29
analysis of combined hydro thermal and dry heat treated wood, HolzRoh und workstoff,
30
63(1):102-111.
31
تأثیر تیمار بخارگرمایی بر میزان نفوذپذیری گازی گونه چوبی تبریزی....
32
[15] Yildiz S., Yildiz O., Colakoglu G., Gezar E.D. Temiz A.2003. The Effects of heat
33
treatment on the specific gravity of Beech and Spruce wood; International Research Group on
34
Wood Preservation: Doc,No: IRG/WP 03-40254, 10p.
35
[16] Rousset p., perre p., Girad p.2004. Modification of mass transefer properties in poplar
36
wood (p. robusta) by a thermal treatment at high temperature. HolzRohWerkst 62: 113-119.
37
[17] Taghiyari H., Talaei A., Karimi A. 2011. A correlation between the gas and liquid
38
permeabilities of beech wood heat-treated in hot water and steam mediums. Maderas. Ciencia
39
y tecnología 13 (3):329-336.
40
[18] Taghiyari H. 2008. Evaluation of Juvenile Wood and Mature Wood Properties of
41
Populus deltoides (69/55) and Populuse uroamericana (cv. I-214) for Pulping Industry, Ph.D.
42
Thesis, Faculty of Natural Resources, University of Tehran. (In Persian)
43
[19] Brito J.O., Silva F.G., Leão M.M., Almeida G. 2008. Chemical composition changes in
44
eucalyptus and pinus woods submitted to heat treatment. Bioresource Technology 99:8545-
45
[20] Esteves B., Velez Marquest A., Domingos I., Pereira H. 2007. Influence of steam
46
heating on the properties of Pine (Pinus pinastar) and Eucalyptus (Eucalyptus globulus)
47
wood. Wood SciTechnol 41:193-207 DOI: 10.1007/s00226-006-0099-0.
48
[21] Esteves B.M., Domingos I.J., Pereira H.M. 2008. Pine wood modification by heat
49
treatment in air. Bio Res.3(1),142-154.
50
[22] Gündüz G., Aydemir D.2009. Some physical properties of heat-treated Hornbeam
51
(Carpinusbetulus L.) wood. Drying Technology 27(5):714-720.
52
[23] Talaei A., Yaghoobi K., Karimi A.N.2010. Comparative study of heat treatment of
53
Beech wood in Hot Water and Steam Medium. International Research Group on Wood
54
Protection: Doc. No: IRG/WP 10- 40536 ; France
55
ORIGINAL_ARTICLE
تاثیر الیاف بلند کاتیونی شده بهعنوان افزودنی بر خواص مقاومتی خمیرکاغذ شیمیایی- مکانیکی
کاربرد افزودنیهای شیمیایی یکی از راهکارهای موثر به منظور افزایش خواص مقاومتی محصول در صنایع کاغذسازی است.
تحقیقات نشان می دهند که کارآیی این مواد بستگی به میزان تزریق و مصرف آنها داشته و کاربرد آنها با نارسایی های
بسیاری همراه است. در سالهای اخیر به منظورکاستن این نارساییها، کاتیونی کردن الیاف و کاربرد آنها مورد توجه قرار
گرفته است. لذا در این تحقیق تاثیر کاربرد الیاف کاتیونی شده به عنوان افزودنی مقاومت ارزیابی شده است. برای این منظور
10 و 15 % کاتیونی شدند و به عنوان ، در سه سطح 5 (EPTMAC) الیاف بلند سوزنی برگ با کاربرد عامل کاتیونی کننده
اضافه شدند. در نهایت خواص مقاومت به کشش، مقاومت به ترکیدن و CMP 3 و 5% به خمیرکاغذ ، افزودنی در سه سطح 1
مقاومت به پارگی کاغذهای دستساز مورد ارزیابی قرار گرفت. نتایج نشان داد با افزایش مصرف الیاف بلندکاتیونی شده،
نیز افزایش مییابد. همچنین الیاف بلند کاتیونی شده در سطح 10 % بیشترین مقاومت را ایجاد CMP مقاومتهای خمیرکاغذ
کردند.
https://www.ijwp.ir/article_11520_6cef749eb849755b1f269c6b7436b1b1.pdf
2012-01-01
161
170
الیاف بلند
کاتیونی کردن
مقاومت
CMP
پیوندزنی
EPTMAC
ایمان
رشیدی جویباری
1
کارشناس ارشد،گروه علوم و صنایع چوب و کاغذ، دانشگاه تهران، کرج، ایران
AUTHOR
محمد
آزادفلاح
adfallah@ut.ac.ir
2
استادیار گروه علوم و صنایع چوب و کاغذ، دانشگاه تهران، کرج، ایران
LEAD_AUTHOR
یحیی
همزه
hamzeh@ut.ac.ir
3
دانشیار گروه علوم و صنایع چوب و کاغذ، دانشگاه تهران، کرج، ایران
AUTHOR
حسین
رسالتی
4
استاد گروه علوم و صنایع چوب و کاغذ دانشگاه علوم کشاورزی و منابع طبیعی گرگان
AUTHOR
[1] Gruber, E., Granzow, C., OTT, T. 1996. New ways for cationizing cellulose. Papier
1
50(12): 729-734.
2
[2] Hamzeh, Y. and Rostampour Haftkhani, A., 1387. Principals of papermaking chemistry.
3
Tehran university press, 424 p.
4
[3] Auhorn, W.J., 2003. Starch in the production of packaging paper, International Paper
5
World IPW. P 40-46.
6
[4] Hube, M. A., 2006. Bonding between cellulosic fibers in the absence and presence of drystrength
7
agents- A Review, BioResources. 1(2): 281-318.
8
[5] Xie,W, Feng H, Qian, X., 2008. Preparation and application of cationized pulp fiber as a
9
papermaking wet-end additive. Journal of Forestry Research 19(3):235−238.
10
[6] Carre, B., 1992.Contribution to a better understanding of the retention and flocculation
11
mechanism occurring during papermaking, Ph.D. thesis, Polytechnics National Institute of
12
Grenoble, France.
13
[7] Cezar, N. And Xiao, H., 2005. Novel retention system based on (2, 3-epoxy propyl)
14
trimethyl ammonium chloride modified silica nanoparticles and anionic polymer. american
15
chemical society. 44: 539-545.
16
[8] Montplaisir, D. Daneault, C. Chabot, B., 2006. Cationisation of thermomechanical pulp
17
fibres: part 1: Grafting reaction optimization, Pulp & Paper Canada 107(10):29-32.
18
[9] Montplaisir, D. Daneault, C. Chabot, B., 2006. Cationisation of thermomechanical pulp
19
fibres: part 2: Influence on strength and retention, Pulp & Paper Canada 107(11):39-42.
20
[10] Khosravani, A., 2006. Investigation on utilizing cationic starch-anionic nanosilica
21
system for application of more filler in fine paper, Ph.D. thesis. University of Tehran.
22
[11] Roberts, J.C., Au, C.O., Clay, G.A., Lough, C., 1986. The Effects of C14-Labled
23
Cationic And Native Starches On Dry Strength And Formation, TAPPI J. 69(10):88.
24
[12] Sharif, S., Ahmad, S. and Izhar-Ul-Haqa, M, M., 2007. Role of quaternary ammonium
25
salts in improving the fastness properties of anionic dyes on cellulose fibers. Society of dyers
26
and colourists, 123: 8–17.
27
[13] Wurzburg, O. B., 1986. Modified starches: properties and uses. CRC Press Inc., Boca
28
Raton, Florida, U.S. pp.113-129.
29
[14] Gess, J. M., Harding, M. J., Gaines, R. C. 1989. Cationic cellulose product and method
30
for its preparation, Canadian Patent 1,249,585. Issued Jan. 31.
31
[15] Schempp, W., Kaufer, M., Krause, T. 1983. Cationization of pulp: reactions and
32
kinetics, Proc. TAPPI Int. Dissolving Specialty Pulps Conf, Boston pp.171-175.
33
[16] Seong, H.S., Ko, S.W. 1998. Synthesis, application and evaluation of cationising agents
34
for cellulosics fibres, JSDC 114(4):124-129.
35
[17] Ma, P., Law, K., Daneault, C. And Zhai, H., 2011. Influence of oxidation and
36
cationization on properties of tmp fibers. Cellulose Chemical Technol. 45 (5-6): 389-395.
37
[18] Sang, Y and Xiao, H., 2009. Preparation and application of cationic cellulose fibers
38
modified by in situ grafting of cationic PVA, Colloids and Surfaces A: Physicochemical and
39
Engineering Aspects. 335.8pp.
40
[19] Asadpour, GH., 1390. Investigation of using colloidal silica nanoparticles and CMP
41
cationic fiber fines on fillers retention and properties of pulp and paper improvement. Ph.D.
42
thesis. University of Agriculture and Natural Resources Of Gorgan.
43
[20] Gullichsen, J., Paulapuro, H. 2000. Papermaking science and technology: Paper physics,
44
1st ed., Helsinski, Finland.
45