@article { author = {Fallah, Peyman and Mohebbi, Behbood and Ilbeygi, Firooz}, title = {Water Absorption and Thickness Swelling behavior of Medium Density Fiberboard Manufactured by Hydrothermally Treated Fibers}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {1}, number = {1}, pages = {1-11}, year = {2011}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {In this research, water absorption and thickness swelling behavior of hydrothermally modified fiberboard (MDF). Were evaluated Fibers were treated in a stainless steel reactor at temperatures of 120, 150 and 180°C for holding times of 0, 30 and 90 min. Test boards were prepared based on the target density of 0.7g/cm3 at the press temperature of 175°C as well as the pressure of 30 bar and the press time of 5 min. Urea formaldehyde (UF) resin was applied at 10% based on the fibers dry weight. Test samples (10×20×20mm) were cut from the boards, dried in an oven and soaked in the water. Water absorption, thickness swelling and their rates were measured in the soaked samples. Results revealed that increase of the treatment temperature caused decrease of water absorption and thickness swelling in the treated boards except in samples treated at 120°C. It was also indicated that increase of the holding time did not significantly affect water absorption and thickness swelling.  }, keywords = {Hydrothermal treatment,Medium Density Fiberboard (MDF),water absorption,thickness swelling}, title_fa = {ارزیابی رفتار و روند جذب آب و واکشیدگی ضخامت تخته فیبر نیمه سنگین(MDF) ساخته شده از الیاف تیمار شده با روش گرمآبی}, abstract_fa = {در این پژوهش، رفتار جذب آب و واکشیدگی ضخامت تخته فیبر نیمه سنگین (MDF)  ساخته شده از الیاف تیمار شده به روش گرمآبی مورد بررسی قرار گرفت. بدین منظور الیاف در درون آب و در سه سطح دمای 120، 150 و 180 درجه سلسیوس و مدت زمان تیمار در سه سطح ماندگاری 0، 30 و 90 دقیقه در رآکتور ویژه اصلاح چوب و مواد لیگنوسلولزی تیمار شدند. تخته‌های آزمونی با تراکم پایه 7/0 گرم بر سانتی‌متر مکعب و با چسب اوره فرم آلدهید (10% بر پایه وزن خشک الیاف) و با بهره‌گیری از پرس گرم (با دمای 175 درجه سلسیوس)، تحت فشار پرس  30 بار و به مدت 5 دقیقه ساخته شدند. سپس از تخته‌ها، نمونه-های آزمونی به ابعاد 10×20×20 میلی‌متر تهیه و پس از خشک شدن در اون و توزین، در آب غوطه ور شدند و رفتار و روند جذب آب همراه با رفتار و روند واکشیدگی ضخامت تعیین شدند. نتایج نشان دادند که با افزایش دمای تیمار (به جز نمونه های تیمار شده در دمای 120 درجه سلسیوس)، میزان جذب آب و واکشیدگی تخته‌ها به طور قابل توجهی کاهش می‌یابند؛ در حالی که در یک سطح دمایی مشخص، افزایش زمان ماندگاری تاثیر قابل‌توجهی بر جذب آب ندارد؛ ولی افزایش دما تأثیرگذارتر است.  }, keywords_fa = {: تیمار گرمآبی,تخته فیبر نیمه سنگین (MDF),روند جذب آب و واکشیدگی ضخامت}, url = {https://www.ijwp.ir/article_11400.html}, eprint = {https://www.ijwp.ir/article_11400_51b82fe9a0eb5c2a33b474d8be1a7b33.pdf} } @article { author = {Darabi, Peivand}, title = {The Effect of Methylation and Anti-Oxidant on Discoloration of Weathered Wood Plastic Composites}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {1}, number = {1}, pages = {12-26}, year = {2011}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {As the outdoor application of Wood Plastic Composites (WPCs) become more widespread, the resistance of these products against weathering, particularly ultraviolet (UV) light becomes more important. When WPCs are exposed to outdoor ultraviolet light, rain, snow and atmosphere pollution, they will be degraded which can be indicated by color fade. To investigate the effects of methylation and Anti-Oxidant separately and together on discoloration of weathered wood plastic composites, composites of poplar wood flour and high density polyethylene.Were made according to the ASTMD 2565, samples were placed in Atlas Xenon apparatus for 250 and 2000 hours. Discoloration and FT-IR spectra of the samples were measured and compared. The results have shown that methylation in short term and long term can relatively reduce the discoloration of weathered samples and also in short term can hinder the photodegradation. FT-IR spectra showed that, in long term, neither of the treatments could protect lignin from irradiation within wood flour. But methylation limited the depth of penetration of weathering. The Antioxidant did not have an influence on color change in a long period of time, but was able to relatively decrease it in short term.}, keywords = {}, title_fa = {بررسی تاثیر متیلاسیون و آنتی اکسیدان بر روی تغییر رنگ چندسازه‌های چوب پلاستیک هوازده}, abstract_fa = { افزایش کاربرد چندسازه‌های چوب پلاستیک (WPC) در محیط بیرون از ساختمان باعث توجه به دوام این فراورده شده است. این فراورده‌ها زمانی که به مدت طولانی در معرض اشعه فرابنفش (فرسایش نوری)، باران، برف و آلودگی‌های جوی بیرون از ساختمان قرار می‌گیرند، دچار تخریب می‌شوند که تغییر رنگ یکی از مشخصه‌های این تخریب است.به منظور بررسی اثر متیلاسیون و آنتی‌اکسیدان (به طور مجزا و همراه هم)، بر روی تغییر رنگ چوب پلاستیک هوازده، تخته‌هایی از آرد چوب صنوبر و پلی‌اتیلن سنگین تهیه شد. بنا به استاندارد ASTM D2565 نمونه‌ها برای مدت زمان بیشینه2000 ساعت، به عنوان بیشینه زمان هوازدگی و 250 ساعت برای بررسی اثر کوتاه مدت تیمارهای مورد نظر درون دستگاه Atlas Xenon قرار گرفتند. تغییر رنگ و طیف FT-IR سطح نمونه‌های شاهد پیش و پس از هوازدگی مورد آزمایش و مقایسه قرار گرفت. نتایج نشان داد که تیمار متیلاسیون می‌تواند در کوتاه مدت و بلند مدت تغییر رنگ ناشی از هوازدگی را کاهش دهد. همچنین با FT-IR مشخص شد این تیمار در کوتاه مدت تا حدی لیگنین آرد چوب تخته‌ها را در مقابل فرسایش نوری حفاظت می‌کند. لیکن در بلند مدت هیچ یک از تیمارها در فرسایش سطحی تاثیر نداشته اما متیلاسیون عمق نفوذ هوازدگی را کاهش می‌دهد. آنتی‌اکسیدان مورد بهره‌گیری در بلند مدت تاثیری بر روی تغییر رنگ نداشته، لیکن در کوتاه مدت تغییر رنگ را در مقایسه با نمونه‌ شاهد تا حدی کاهش می‌دهد.}, keywords_fa = {هوازدگی,چندسازه چوب پلاستیک,تغییر رنگ,متیلاسیون,آنتی‌اکسیدان}, url = {https://www.ijwp.ir/article_11406.html}, eprint = {https://www.ijwp.ir/article_11406_8591bfd7e33aa826206d2d66d3fa7304.pdf} } @article { author = {Jahanshahi, Shayesteh and Tabarsa, Taghi and Asghari, Zhila and Resalati, Hossein}, title = {Investigation of the Amount of Tannic Acid in Bark Oak (Quercus castanifolia)}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {1}, number = {1}, pages = {27-35}, year = {2011}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {In order to perform a qualitative and quantitative investigation on tannic acid content in Oak bark, the bark samples were collected from Educational Forest of Gorgan Agricatural Science and Natural Resources University. Solvents were used in laboratory to extract tannin and were considered as variables. Regarding diversity of bark components, Tappi Test Method (T264-om-88) was used to determin extractives contest. Twenty grams dry material was placed in a soxhelt. Extracted material with hot water, methanol and water- methanol (1:1) solvent were 25±2, 20±2 and 18±2 percents respectively. Tannic acid existance in extracts was determined using High Performance Liquid Choromatography (HPLC) and types of bonds were determined using FT-IR. Results showed that water-methanol solvent was the best solvent for extracting tannin.the amount of extracted tannic acid in maximum wavelength of 250 nm and using gradient system, in solvent water-methanol, methanol and hot water solvent were 70±2, 30±2 and 5±2 precents, respectively. Amount of tannin in the bark using solvent water-methanol was determined to be 14 perecents that was the highest amount.}, keywords = {oak,Tannic acid,extractives,Hydrolyzable Tannins,High Performance Liquid Choromatography,Infrared spectroscopy}, title_fa = {بررسی میزان اسید تانیک موجود در پوست بلوط بلند مازو (Quercus castanifolia)}, abstract_fa = {به منظور شناسایی کمی و کیفی اسید تانیک موجود در پوست بلوط بلندمازو، نمونه‌های پوستاز پارسل یک سری جنگل آموزشی دکتر بهرام نیا (شصت کلاته) جمع‌آوری شد که در حوزه استحفاظی اداره کل منابع طبیعی استان گلستان قرار دارد. به منظور استخراج تانن در آزمایشگاه از حلال‌ها بهره‌گیری شد و نوع حلال به کار برده شده در این بررسی به عنوان عامل متغیر در نظر گرفته شد. با توجه به ترکیب‌های متنوع پوست، روش استاندارد TAPPI(T264-om-88) برای تعیین مواد استخراجی پوست به کار رفت. استخراج بر روی 20 گرم ماده خشک اولیه به مدت 5 ساعت با دستگاه سوکسله انجام شد. عصاره استخراج شده با حلال‌های آب داغ، متانول و آب-متانول(1:1) به ترتیب برابر2±25 ، 2±20 و 2± 18 درصد بود. میزان اسید تانیک موجود در عصاره‌های یاد شده از نظر کمی با دستگاه کروماتوگرافی مایع با عملکرد بالا محاسبه شد و ساختار آن با دستگاه طیف‌سنج FT-IR مورد بررسی قرار گرفت. نتایج نشان داد که حلال آب-متانول بهترین حلال برای استخراج تانن می‌باشد و میزان اسید تانیک استخراج شده در طول موج بیشینه 250 نانومتر و بهره‌گیری از نظام گرادیانی در حلال‌های آب-متانول، متانول و آب به ترتیب شامل 2±70، 2±30 و 2±5 درصد بود و میزان تانن موجود در پوست با بهره‌گیری از حلال آب-متانول(1:1) بیشترین میزان و حدود 14 درصد دیده شد.  }, keywords_fa = {بلوط,اسید تانیک,مواد استخراجی,تانن هیدرولیز شدنی,کروماتوگرافی مایع با عملکرد بالا,طیف سنج زیر قرمز}, url = {https://www.ijwp.ir/article_11410.html}, eprint = {https://www.ijwp.ir/article_11410_141ec1c6eab3d13813fb51a662c5c3d1.pdf} } @article { author = {Najafi, Abdollah}, title = {Effect of Immersion Temperature on Long-term Water Uptake Behavior of HDPE/Wood sawdust Composite}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {1}, number = {1}, pages = {36-44}, year = {2011}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {Effect of immersion temperature on long-term water uptake behavior of HDPE/wood sawdust Composite was studied in this research. Panels of wood plastic composites (WPCs) were manufactured from a mixture of sawdust of wood and High density polyethylene powder at 60% by weight filler loading at constant temperature and pressure using a dry blend/hot press method. The nominal density and dimensions of the panels were 1g/cm3 and 35×35×1 cm3, respectively. Specimens were cut from the panels based on DIN-EN 317 standard. The prepared specimens were immersed in distilled water‍ at 20, 40 and 60ºC to measure long-term water absorption. The results showed that water absorption in HDPE/wood sawdust composite proved to follow the kinetics of a Fickian diffusion process. By increasing the immersion temperature, the time to reach to maximum value of water absorption decreased and maximum value of water absorption increased. Diffusion coefficients were affected parabolically by immersion temperature.}, keywords = {}, title_fa = {ارزیابی اثر دمای غوطه وری بر رفتار جذب آب طولانی مدت ماده مرکب پلی اتیلن سنگین / خاک اره چوب}, abstract_fa = {اثر دمای غوطه‌وری بر ویژگی‌های جذب آب طولانی مدت ماده مرکب پلی‌اتیلن سنگین/خاک اره چوب در این پژوهش مورد بررسی قرار گرفت. به این منظور تخته‌های چوب پلاستیک از مخلوط خاک اره چوب و پودر پلی‌اتیلن سنگین به نسبت 60% وزن پرکننده در دما و فشار ثابت به روش خشک مخلوط/پرس گرم ساخته شد. چگالی (دانسیته) تخته‌ها 3g/cm1 و ابعاد آن 1×35×35 سانتی‌متر در نظر گرفته شد. با بهره‌گیری از استاندارد 317DIN-EN  نمونه‌هایی برداشته شد و در آب مقطر با دماهای 20، 40و 60 درجه سلسیوس غوطه‌ور شد تا جذب آب طولانی مدت اندازه‌گیری شود. نتایج نشان داد که روند جذب آب در ماده مرکب پلی‌اتیلن سنگین/خاک اره چوب از قانون فیک پیروی می‌کند. با افزایش دمای غوطه‌وری زمان رسیدن به جذب بیشینه کاهش و میزان جذب حداکثر افزایش یافت. ضریب انتشار رطوبت به صورت سهمیگون (پارابولیکی) تحت تاثیر افزایش دمای غوطه‌وری قرار گرفت.}, keywords_fa = {ماده مرکب چوب پلاستیک,خاک اره چوب,پلی‌اتیلن سنگین,جذب آب,پرس گرم}, url = {https://www.ijwp.ir/article_11412.html}, eprint = {https://www.ijwp.ir/article_11412_3cfef901abc414a71b9c1e821cffea61.pdf} } @article { author = {Rahmati, Haydeh and Abdolkhani, Ali and Hamzeh, Yahya}, title = {Characterization and Removal of Resins from Mixed Tropical Hardwoods Kraft Pulp}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {1}, number = {1}, pages = {44-56}, year = {2011}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {Wood resin of mixed tropical hardwoods (MTH) Kraft pulp was removed and characterized. Characterization of wood resin from different pulping stages was achieved accurately using Pyrolytic Gas Chromatographic-Mass Spectrometry (Py-GC-MS). Two types of resin were recognized: (1) small fraction of unreactive and inaccessible damar resin which was only found to be concentrated in centri-cleaner reject, (2) large fractions of fatty acids, fatty alcohols, and sterols. These can be removed chemically, e.g. by surfactant addition. Results of experiments showed that addition of surfactant enhances removal of extractives and decreases the chemical consumption during bleaching stage.  }, keywords = {: Extractives,Resin؛ Py-GC-MS,Surfactant؛ Hardwoods,Bleaching}, title_fa = {بررسی امکان استخراج، شناسایی و حذف رزین‎های موجود در خمیرکاغذ کرافت مخلوط گونه‎های پهن برگ استوایی}, abstract_fa = {در این پژوهش رزین‎های موجود در خمیر کاغذ کرافت تولیدی از مخلوط گونه‎های پهن برگ استوایی در مراحل مختلف تهیه خمیر استخراج، اندازه‌گیری و شناسایی شدند. شناسایی و تجزیه این رزین‎ها در مراحل مختلف خمیر کاغذسازی با بهره‌گیری از دستگاه پیرولیز کننده متصل به کروماتوگرافی گازی – طیف سنج جرمی (Py – GC – MS) انجام شد.         به طورکلی در این پژوهش دو نوع رزین شناسایی شد: (1) میزان اندکی از رزین واکنش ناپذیر و غیرقابل دسترس دامار که تنها به صورت متمرکز در مواد وارده تمیزکننده‌های مرکز گریز یافت شد، و (2) میزان زیادی از اسیدهای چرب، الکل‎‏های چرب و استرول‎ها. نتایج نشان داد که این نوع رزین‎ها را می‌توان با بهره‌گیری از مواد شیمیایی برای مثال از راه افزودن مواد فعال کننده سطح حذف کرد. نتایج آزمایشها نشان دادند که افزودن مواد فعال کنندة سطح، سبب افزایش خروج مواد استخراجی از خمیرکاغذ و کاهش میزان مصرف مواد شیمیایی در مرحله رنگ بری آن می شود.  }, keywords_fa = {مواد استخراجی,رزین,طیف سنجی جرمی,مواد فعال کننده سطح,گونه‎های پهن‎برگ,رنگ بری}, url = {https://www.ijwp.ir/article_11415.html}, eprint = {https://www.ijwp.ir/article_11415_93319b553c2ae0a858014a3737c78971.pdf} } @article { author = {Sharifnia, Houri and Mohebbi, Behbood}, title = {Enhanced Mechanical Properties of Poplar Wood by a Combined-Hydro-Thermo-Mechanical (CHTM) Modification}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {1}, number = {1}, pages = {57-66}, year = {2011}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {The current research explains an innovated technique to enhanced mechanice properties of poplar wood by combination of two modification techniques, hydrothermal and mechanical. Blocks of 50×55×500mm3 were cut from poplar wood and treated in a reactor at 120, 150 and 180°C for 30 min. Afterwards, the blocks were pressed at 180°C for 20 min at a pressure of 80 bar to achieve a compression set of 60% in radial direction. Density and bending properties (moduli of elasticity and rupture) as well as impact resistance were determined in the specimens and compared with those of the untreated one. Results revealed that the density, modulus of elasticity and impact load resistance increased as the treatment temperature rose. The highest density, modulus of elasticity and impact resistance were determined in samples treated at 150°C. The modulus of rupture was increased as the temperature was raised up to 120°C and then it was reduced as low as the untreated one at higher temperatures.  }, keywords = {}, title_fa = {بررسی امکان بهبود ویژگی‌های مقاومتی چوب صنوبر با روش ترکیبی اصلاح گرمآبی- مکانیکی (CHTM)}, abstract_fa = {در این پژوهش با ابداع شیوه‌ای جدید و ترکیب دو روش اصلاحی گرمآبی (Hydrothermal) و مکانیکی (Mechanical) اقدام به اصلاح ویژگی‌های مکانیکی چوب صنوبر شد. بدین منظور نمونه‌هایی به ابعادmm500×55×50 تهیه شدند و در رآکتور ویژه ای، با دماهای 120، 150 و 180 درجة سلسیوس و به مدت 30 دقیقه در درون آب تیمار شدند. پس از آن نمونه‌ها با پرس و تحت فشار 80 بار و دمای 180 درجة سلسیوس به مدت 20 دقیقه و با ضریب فشردگی 60% فشرده شدند. چگالی، خصوصیات خمشی (مدول کشسانی و مدول گسیختگی) و مقاومت به ضربه نمونه‌های تیمار شده اندازه گیری شدند و با نمونه های تیمار نشده مقایسه شدند. نتایج به دست آمده نشان دادند که چگالی، مدول کشسانی و مقاومت به ضربه چوب صنوبر با افزایش دمای تیمار فزونی یافتند و بالاترین چگالی، مدول کشسانی و مقاومت به ضربه در دمای 150 درجه سلسیوس به دست آمد. افزایش دما تا 120 درجه سلسیوس، مدول گسیختگی را بالا برد؛ ولی افزایش دما تا 180 درجه سلسیوس، این مدول را تا حد چوب صنوبر تیمار نشده کاهش داد.}, keywords_fa = {تیمار ترکیبی گرمآبی-مکانیکی,چگالی,خواص خمشی,مقاومت به ضربه}, url = {https://www.ijwp.ir/article_11417.html}, eprint = {https://www.ijwp.ir/article_11417_eca36f7eca40c335a8a1e5f37c2e9aaf.pdf} } @article { author = {Ghotbifar, Alireza and Kazemi najafi, Saeid and Behrooz ashkiki, Rabi}, title = {Influence of Concentration of Compatibilizer on Long- term Water Absorption and Thickness Swelling Behavior of Polypropylene, Wood Flour/Glass Fiber Hybrid Composites}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {1}, number = {1}, pages = {67-78}, year = {2011}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {The influence of concentration (2, 3 and 5%) of Maleic Anhydride Grafted Polypropylene (MAPP) on long term water absorption and thickness swelling of wood flour/E-glass fiber Hybrid polypropylene composites were studied. The samples (strips with 10 mm thickness and 70 mm width) were made using a laboratory twin-screw extruder. Long term water absorption and thickness swelling kinetics of manufactured hybrid composites were evaluated by immersing them in water at room temperature for several weeks. Water diffusion coefficients and thickness swelling parameter (KSR) were calculated by evaluating the water absorption isotherms. The results showed that increase in MAPP content to 2 and 5% significantly decrease maximum water absorption, thickness swelling, water diffusion coefficients and KSR of the composites. Water diffusion coefficient of the studied composites was proved to follow the kinetics of a Fickian diffusion process.  }, keywords = {Hybrid composites؛ MAPP؛ Glass fiber؛ Wood flour؛ Water absorption,thickness swelling}, title_fa = {ارزیابی اثر میزان سازگار کننده بر جذب آب و واکشیدگی ضخامت بلند مدت مواد مرکب هیبریدی پلی پروپیلن، آرد چوب و الیاف شیشه}, abstract_fa = {در این پژوهش، تاثیر میزان (2، 3 و 5 درصد) مالئیک انیدرید پلی پروپیلن (MAPP) بر جذب آب و واکشیدگی ضخامت مواد مرکب هیبریدی پلی پروپیلن، آرد چوب و الیاف شیشه مورد بررسی قرار گرفت. نمونه هایی با سطح مقطع           mm10 ×70 با بهره‌گیری از اکسترودر دو مارپیچ ناهمسو گرد ساخته شد. برای بررسی روند جذب آب و واکشیدگی ضخامت بلند مدت، مواد مرکب هیبریدی ساخته شده برای چندین هفته تا رسیدن به بیشینه میزان جذب آب، غوطه ور در آب بودند. ضریب انتشار آب و نرخ واکشیدگی ضخامت در مواد مرکب هیبریدی تعیین شدند. نتایج نشان داد افزودن 2 درصد MAPP و افزایش آن تا 5 درصد باعث کاهش ضریب انتشار آب، نرخ واکشیدگی ضخامت و بیشینه میزان جذب آب و واکشیدگی ضخامت مواد مرکب هیبریدی می‌شود.}, keywords_fa = {مواد مرکب هیبریدی,مالئیک انیدرید پلی پروپیلن,الیاف شیشه,آرد چوب,جذب آب و واکشیدگی ضخامت}, url = {https://www.ijwp.ir/article_11418.html}, eprint = {https://www.ijwp.ir/article_11418_77f53a7eae71d722d543aba0d39fda6d.pdf} } @article { author = {Mansouryar, Iraj}, title = {Dimensional Stability of Poplar Wood by Paraffin Emulsion, Quaternary Ammonium and Hydrated Starch using Full-cell Treatment}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {1}, number = {1}, pages = {79-88}, year = {2011}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {The dimensional stability of wood is an important property for outdoor applications. In this study, the dimensional stabilization of poplar wood (Populus Alba) by applying emulsion of paraffin, quaternary ammonium and starch was investigated. Paraffin at three levels of 0%, 3%, 5%, quaternary ammonium at three levels of 0%, 1.5%, 2.5% and starch at three levels of 0%, 1% and 2% were selected as variables. Some physical characteristics including longitudinal, tangential and radial swelling were determined. Based on the results, for optimizing physical properties, the treatment of 5% paraffin, 0-1.5% quaternary ammonium and 0-1% starch was recommended.  }, keywords = {Paraffin emulsion,Quaternary ammonium,Hydrated starch,physical properties,Poplar}, title_fa = {ارزیابی پایداری ابعادی چوب صنوبر (Populus alba) با بهره‌گیری از امولسیون پارافین، کواترنری آمونیوم و نشاسته هیدراته به روش سلول پر}, abstract_fa = {پایداری ابعادی یکی از ویژگی‌های چوب‌های مورد بهره‌گیری در فضای باز و در خارج ساختمان می‌باشد، در این پژوهش برای کنترل رطوبت و ایجاد پایداری ابعاد، امولوسیون ترکیبی از پارافین درسه سطح صفر، سه و پنج درصد و کواترنری آمونیم در سه سطح صفر، یک و نیم و دو و نیم درصد و نشاسته هیدراته با نسبت های وزنی صفر، یک و دو درصد مورد بررسی قرارگرفته است و ویژگی‌های فیزیکی شامل واکشیدگی شعاعی ، مماسی و طولی اندازه‌گیری شده است. نتایج نشان دادند برای بهینه سازی کیفیت فیزیکی و پایداری ابعادی امولسیون پارافین پنج درصد و کواترنری آمونیم صفر تا یک و نیم درصد و نشاسته صفر تا یک درصد مناسب می‌باشد.  }, keywords_fa = {امولسیون پارافین,کواترنری آمونیم,نشاسته هیدراته,پایداری ابعادی,صنوبر}, url = {https://www.ijwp.ir/article_11419.html}, eprint = {https://www.ijwp.ir/article_11419_e774fcd2520aa60320b7321c856344b6.pdf} }